Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Contents iLux™ Integrated Lighting System w/infiNET™: CLS-C6RF 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications .....................................................................................................
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ ™ iLux Integrated Lighting System w/infiNET™: CLS-C6RF Introduction Features and Functions • Wall-mounted integrated lighting and shade control • Six channels of dimming or switching • Six groups of shade or drape control • Linkable for up to 54 lighting channels and 54 shade groups • Up to 16 user-settable scenes | Large ON and OFF buttons • Seven configurable “rocker” buttons with customizable label strip • Flip-up front cover
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF designed for 120 VAC 50/60 Hz installations; the CLSI-C6RF and CLSI-C6MRF are designed for 230 VAC 50/60 Hz installations. The units are functionally identical, except that the CLS/CLSI-C6MRF units include a built-in motion sensor. For simplicity in this guide, references to the CLS-C6RF unit apply equally to all, except where noted.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Multi-Unit Expansion A single CLS-C6RF master will support up to eight additional units, enabling systems of up to 54 lighting zones and 54 shade groups. Scene recall, master dimming, and occupancy status are shared between the units. Each individual unit can still support a complete assortment of local devices including keypads, shade controllers, and sensors.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF CLS-C6RF Specifications (Continued) DETAILS SPECIFICATION Power Requirements CLS-C6RF Line Power, 100 –127 VAC, 50 / 60Hz CLSI-C6RF Line Power, 220 – 240 VAC, 50 / 60Hz Default MNET ID Control System Update Files 2-Series Control System 1F 2, 3 IR Receiver Reception Frequency Version 2.004.CUZ or later 36 kHz Requires Crestron IR remote (sold separately). RF Wireless RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ NOTE: Crestron software and any files on the website are for Authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description All controls and indicators for the CLS-C6RF are located on the front of the unit.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF CLS-C6RF Front Panel CLS-C6RF Rear Panel Connectors, Controls, & Indicators # CONNECTORS, CONTROLS, & INDICATORS DESCRIPTION 1 Bargraphs In Standard mode and Lights mode, the bargraphs, each a series of seven LEDs, indicate the current light intensity for the six lighting loads. In Shades mode, they indicate the shade position for each of the shade groups. The bargraphs have other functions in Setup mode.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Connectors, Controls, & Indicators (Continued) # CONNECTORS, CONTROLS, & INDICATORS DESCRIPTION 5 Motion Detector (CLS/CLSIC6MRF only) The built-in motion detector can be used to activate a particular scene when there is activity in the room, and/or to activate a particular scene (typically Off) when there is no activity for a specified period.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Connectors, Controls, & Indicators (Continued) # CONNECTORS, CONTROLS, & INDICATORS DESCRIPTION 16 LOAD1 – LOAD6 Use these terminals to connect the CLS-C6RF dimmer channel outputs to the appropriate lighting loads. 17 HOT, NEUTRAL, ((Ground) Use these terminals to connect the unit to the 120V (CLS-C6RF/MRF) or 230V (CLSI-C6RF/MRF) AC power source.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF CLS-C6RF Installation Configurations * Refer to “Appendix A: Supported Devices” on page 42 for details on devices supported by the CLS-C6RF. 10 • iLux™ Integrated Lighting System w/infiNET™: CLS-C6RF Operations Guide - DOC.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Hardware Hookup Refer to the following diagram for connection of the AC wiring. Connect each load wire to the corresponding LOAD terminals on the unit, connect the power line hot wire from the circuit breaker to the HOT terminal on the unit, connect all neutral wires to the NEUTRAL terminal on the unit, and connect all ground wires to the (ground) terminal on the unit. For details, refer to the iLux Lighting System Installation Guide, Doc.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Configuring the CLS-C6RF The overall configuration of the CLS-C6RF can be accomplished in two ways: using the front panel controls, or using the supplied iLux™ Designer application software, which can be downloaded from the Crestron website. Configuring via the front panel controls is not as extensive as what can be done using the iLux Designer, but permits basic functional setup without having to use a PC.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ 4. If you would like a certain lighting load to be unaffected by that scene recall, press and hold the center of the button (so both sides make contact) for three seconds. The top two and the bottom two LEDs of the associated bargraph will be lit (and the display will show - -) to indicate that the level of the lighting load will not change when that scene is recalled. 5.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Setup Mode Mnemonics TWO-DIGIT DISPLAY DESCRIPTION Sc Scene Programming Ld Setup lighting load Load types LE Setup lighting load Low-End limits HE Setup lighting load High-End limits bF button Functions (i.e. recall scene, toggle scene, shades control, etc.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF • If a lighting load is defined as an “unused” load type, the bargraph for that lighting load will have all LEDs off. If you try to adjust that lighting load, the two-digit display will show “Er.” • To mark a lighting load as "not affected" (i.e., the lighting load’s current state will not be changed by recalling the scene), press and hold the center of the corresponding button for three seconds.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Lighting Load Type Setup (Continued) Load Type 1. 2. Number LEDs Default LowEnd / HighEnd Fluorescent (2-wire) 4 top 4 on 10 / 100 Non-dim (On at start/Off at start)¹ 5 top 5 on 0 / 100 Non-dim (On at end/Off at start)² 6 top 6 on 0 / 100 Whether going on or off, this load type will switch at the start of the fade. If going off, this load type will switch at the start of the fade; if going on, it will switch at the end.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Setup High-End Levels (HE) This option allows you to set the “full on” level of the lighting loads below their maximum brightness. To set the high-end levels for the six lighting loads: • Enter Setup mode and scroll to the “HE” option (using the ^ and v buttons). At this point the lights will not change, but the bargraphs immediately indicate the high-end levels for each lighting load.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF When the button is released, the LED for that button should flash once to indicate that programming took place. 2. Next, use the up/down button to scroll to the next function and value to be assigned, and assign the desired buttons. Repeat this procedure for each function and value to be assigned. 3. After assigning all button functions, press Save, and the button function information will be saved.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ • When programming from the front panel, exit time cannot be adjusted or displayed. If it has not been changed with iLux Designer, or SIMPL, it will be the default of 30 minutes. Scenes to be recalled also cannot be changed from the front panel. If they have not been changed with iLux Designer, the OFF scene will be recalled on exit (if enabled), and ON scene will be recalled on entry (if enabled).
iLux™ Integrated Lighting System w/infiNET™ • Crestron CLS-C6RF There are a number of possible error conditions that can occur during the discovery process (before Save is pressed). They are: 1. Corrupt data on network. 2. Two or more devices with same TSID number. 3. Invalid device type found on network. (CLS-C6RF modules only support a limited number of device types.) Refer to “Appendix A: Supported Devices” for details. 4. Too many keypads found on network. (A maximum of 16 are supported.) 5.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ that device will flash for one second to confirm that it has been assigned. The bargraph for that group will also flash off for one second. • Go to a shade group and assign all channels. Then go to the next shade group and assign those channels. Repeat for all shade groups. Note that a given shade group can only have one type of shade controller (SDC, SDC-DC, or SSC).
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF • When acquire is done, the display will alternate between “Ac” and result codes. • If acquire was successful, the save led will flash, and the Cancel led will turn off. (Cancel button is disabled). Press the Save button to go into Standard mode. • If acquire was unsuccessful, the Cancel led will flash. The previous gateway link information will be restored. Press the Cancel button to go into Standard mode.
Crestron CLS-C6RF • iLux™ Integrated Lighting System w/infiNET™ Press the Cancel button to return to Standard mode without saving. Supported channel settings are: 0 = channel disabled, 11.-.26 = Fix Channel mode, Au = Auto Channel mode NOTE: If at any time the transceiver connection is lost because the serial jack was inserted, the E1 error code will be shown, the Save led will turn off, and the Cancel led will turn on. The Cancel button can be used to exit Setup and enter Standard mode.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF The following are the minimum software versions required to use the iLux Designer program. ILux Designer version 1.02.05 or later Crestron Toolbox version 1.01.11 or later Crestron Engraver version 2.5.0 or later* Crestron Database version 17.3.0 or later* *Required only if you intend to use the Crestron Engraver to prepare custom labeling. The following sections provide a brief description of the iLux Designer functions.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ sensor timeout when the motion sensor function is enabled. You can also launch the Crestron Engraver software program to create an engraver project for the CLS-C6RF function buttons label. NOTE: In systems with multiple CLS-C6RF units that have the motion sensor function enabled, it is important to set the motion sensor timeout of each unit to the same value.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF LED Brightness These settings are for the white LEDs next to the function buttons and the ON button, the shift LEDs, and the green bargraph LEDs. 1. At the prompt, type or and press Return. The system displays, for example: White led brightness level = 70 iLux> 2. To change the brightness, type or where ## is any number from 1 to 100. 3.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ 5. Operations Guide - DOC. 6418A Install the front cover assembly on the unit by lining it up at the top and pressing the bottom edge until it snaps into position.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Programming Software IMPORTANT NOTE: The procedures in this section relate to creating a program that can include the CLS-C6RF, not to programming the CLS-C6RF itself. If it is to be part of a 2-Series control system, you must first configure the unit using the iLux™ Designer program or configure it manually using the front panel controls. Then use SIMPL Windows, D3 Pro™, or Crestron SystemBuilder™ to communicate with a 2-Series control system.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control system by selecting hardware from the Device Library. • To incorporate the CLS-C6RF into the system, first drag a C2N-MNETGW gateway icon from the Wireless Receivers | Wireless Receivers (RF) folder of the Device Library and drop it in the System Views panel.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF C2Net Device, Slot 9 • Additional CLS-C6RF devices are assigned different MNET ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the RF ID, as shown in the following figure. “CLS-C6RF Device Settings” Window • Programming Manager The ID code specified in the SIMPL Windows program must match the MNET ID of each unit.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade, it is necessary to establish communication. Establishing Communication Use Crestron Toolbox for communicating with the CLS-C6RF; refer to the Crestron Toolbox help file for details.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Programs and Firmware • Upload the SIMPL Windows file to the control system using SIMPL Windows or Crestron Toolbox. • For Indirect Serial Communication with the CLS-C6RF, display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Operation The iLux always operates in one of four modes. The Setup mode is used to redefine many of the CLS-C6RF settings. Details regarding the Setup mode are given in “Setup Mode” on page 13. The following sections provide detailed descriptions of the Standard, Lights, and Shades modes.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF • Recall-scene (specify scene number OFF, ON, 1-15). Refer to “Recall-scene buttons” below. • Toggle-scene (specify scene number ON, 1-15). Refer to “Toggle-scene buttons” on page 35. • Lighting master raise/lower (last scene). Refer to “Master (Last Scene) Raise/Lower buttons” on page 35. • Lighting master raise (last scene). Refer to “Lighting Master (Last Scene) Raise buttons” on page 35. • Lighting master lower (last scene).
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Toggle-scene buttons • Used to alternately recall a scene or turn scene lights off (i.e., have the specified lighting loads go to off, in the specified time). • The toggle scene function should not be assigned to any scene that includes shades. • Note that the ON and OFF buttons are fixed recall scene buttons, and cannot be defined to be toggle. (However, a remote keypad button can be defined to toggle the ON scene, but not the OFF scene.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Occupancy Sensing Occupancy sensing may have specific actions specified for entry and for exit. Either or both of these may be disabled. A limited number of actions are available when programmed locally; more options are available when programmed using the iLux Designer program. If motion is detected, or some other activity takes place, a room is considered occupied.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF manually adjust this channel after that, you must release and re-press the button. The unit remains in Lights mode. To exit Lights mode, press the Lights button again (or press Cancel), and the LED will go off. The unit is now back in Standard mode. (Also, if no adjustments are made within one minute, the unit reverts to Standard mode.) Pressing the Shades button automatically exits Lights mode and enters Shades mode.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF group terminates, and the new command takes precedence. To manually adjust this channel after that, you must release and re-press the button. The unit remains in Shades mode. To exit Shades mode, press the Shades button again (or press the Cancel button); the LED will go off and the unit returns to Standard mode. Also, pressing the Lights button automatically exits Shades mode and enters Lights mode.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CLS-C6RF Troubleshooting TROUBLE POSSIBLE CAUSE(S) Unit does not function. CORRECTIVE ACTION Improper MNET ID used. Verify that the keypad’s MNET ID matches the MNET ID in the software program. Unit is not receiving line power.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF When calculating the length of wire for a particular Cresnet run, the wire gauge and the Cresnet power usage of each network unit to be connected must be taken into consideration. Use Crestron Certified Wire only. If Cresnet units are to be daisy-chained on the run, the Cresnet power usage of each network unit to be daisy-chained must be added together to determine the Cresnet power usage of the entire chain.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ You can also log onto the online help section of the Crestron website (www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Appendix A: Supported Devices The CLS-C6RF local devices network supports up to 16 remote devices consisting of keypads, shade controllers, and additional CLS-C6RF units. Keypads Up to 16 keypads can be added on the local devices network. The following table lists default button functions for the keypad types currently supported. These settings can be changed using the front panel Setup mode or via iLux Designer.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Appendix B: Console Commands Console commands are available through the Crestron Toolbox program. 1. Select Text Console from the Tools menu. 2. At the prompt, enter HELP ALL and press Return.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF GREENLEDLEVEL Description: Use this command to display or set the green LED level on the CLS-C6RF.* Help Menu(s): Device Syntax: GREENLEDLEVEL <0..100> set the green leds brightness to level <0..100> GREENLEDLEVEL display the green leds brightness level <0..100> Parameters: <0…000> - to set the green LED brightness level None – to display the current green LED brightness *Refer to “LED Brightness” on page 26 for details.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ PUTCONFIG* Description: Use this command to load the project file to the CLS-C6RF Help Menu(s): File Syntax: PUTCONFIG PROJECT Parameters: PROJECT – The only valid parameter value REBOOT Description: Use this command to reboot the CLS-C6RF Help Menu(s): Common Syntax: REBOOT Parameters: None REPORTCRESNET Description: Use this command to report devices on the local network Help Menu(s): Common Syntax: REPORTCRESNET REP
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF VERSION Description: Use this command to display the firmware version number.* Help Menu(s): Common Syntax: VERSION Parameters: None *For example, this command would produce information similar to the following: CLS-C6MRF Lighting Controller with Motion [v1.00.04, #FFFD6899] WHITELEDLEVEL Description: Use this command to display or set white LEDs brightness level* Help Menu(s): Device Syntax: WHITELEDLEVEL <0..
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Appendix C: Factory Default Values ITEM DEFAULT VALUE All lighting load types. Incandescent All Low End limits 0% All High End limits 100% Function buttons recall scenes 1-6 Up/Down button lights (Last Scene Master). Occupancy sensing OFF scene on exit - disabled ON scene on entry - disabled Timeout = 30 minutes Off scene 2 second fade, no shades.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Appendix D: Button Functions Following is a list of button functions, in table format, one function per table. Each table lists Behavior, LED Action, Applies to, Rocker behavior, and Notes. Some topics may not apply to certain button types; this is defined in the “Applies to” row.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Function name Toggle Scene (on, 1-15) Behavior Alternates between “Recall Scene” and “Turn Off Scene Lights” actions for the specified scene. In determining which action should be executed, the CLS-C6RF will check the state of all lights programmed in the scene. If any light in the scene is on, this function will cause the lights to go off. If all lights in the scene are off, this function will recall the scene.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Function name Raise/Lower Lighting Load (1-6) Behavior Pressing left side of button will act same as Lower Lighting Load. Pressing right side of button will act same as Raise Lighting Load.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Function name Toggle-Dim Scene (on, 1-15) Behavior Similar to the “Toggle Scene” function, except that a maintained press of the button will cause the lights to enter “cycle-dim” mode. That is, all lights programmed in the specified scene will either raise or lower until the button is released. (Behavior is the same as Raise Scene function.) A subsequent maintained button press will cause the lights to dim in the opposite direction.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Function name Open Shades Momentary (All, Group 1-6) Behavior Specified shades will move toward the Open position for as long as the button is pressed. Movement will stop when button is released. LED On while button is pressed Applies To Remote Button Rocker Behavior N/A Notes Shade commands with “All” parameter will only affect all the shade groups connected to the given CLS-C6RF module.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Function name Open Momentary/Open Full (All, Group 1-6) Behavior A quick tap of the button will perform a “Full Open”. A maintained press will perform a “Momentary Open” until the button is released. If the shade is already moving in the open direction, a tap will stop it: So, if you tap the button once, it will start moving to full open; then if you tap it again, it will stop.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF Function name External Function (1-32) Behavior Activates the corresponding “press” digital signal (press1 – press32 on the External Functions slot) on the Cresnet System connected to the CONTROL SYSTEM port. Signal will remain high for as long as the button is pressed. LED On when the corresponding “fb” digital signal (fb1 – fb32 on the External Functions slot) from the control system is high.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
iLux™ Integrated Lighting System w/infiNET™ Crestron CLS-C6RF This page is intentionally left blank. 58 • iLux™ Integrated Lighting System w/infiNET™: CLS-C6RF Operations Guide - DOC.
Crestron CLS-C6RF iLux™ Integrated Lighting System w/infiNET™ This page is intentionally left blank. Operations Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com User Guide - DOC. 6418A (2013968) 06.08 Specifications subject to change without notice.
