Crestron CPC-2000A Touchpanel with Dual Joysticks Contents Touchpanel with Dual Joysticks: CPC-2000A 1 Description................................................................................................................................. 1 Functional Description ................................................................................................ 1 Software ......................................................................................................................
Crestron CPC-2000A Touchpanel with Dual Joysticks Touchpanel with Dual Joysticks: CPC-2000A Description Functional Description The CPC-2000A is a 5.7 inch (14.5 cm) passive matrix color LCD touchscreen control panel with dual joystick control and adjustable speed knobs for the remote control system (herein referred to as the control system). As part of the Crestron ProCam family which includes pan/tilt heads, a camera control network is formed.
Touchpanel with Dual Joysticks Crestron CPC-2000A Crestron CT-1600 with respect to programming and configuration. The electronic hardware is housed in a black metal enclosure with silk-screened labels, shown below. Four speed adjustment knobs are located below the touchsceen area. Two joysticks are located on the horizontally level area of the top face. A RJ-type network connector is available from the back panel of the unit.
Crestron CPC-2000A Touchpanel with Dual Joysticks the speed. Speed can be adjusted while using the joysticks. The knobs are panel mounted single-turn potentiometers. Joysticks Two 2-axis, spring centering joysticks, located beneath the sensitivity adjustment knobs, are used to control pan, tilt, focus, and zoom movement of a network camera/lens assembly. Vertical movement of the right-most joystick (when viewing the touchscreen) tilts the head. Horizontal movement of the right-most joystick pans the head.
Touchpanel with Dual Joysticks Crestron CPC-2000A Leading Specifications of the CPC-2000A (Continued) SPECIFICATION View Screen Dimensions View Screen Resolution View Screen Display View Screen Illumination View Screen Touch Screen DETAILS Height: 3.50 in (8.89 cm) Width: 4.70 in (11.
Crestron CPC-2000A Touchpanel with Dual Joysticks Network Wiring NOTE: This section only applies to those applications using 4-wire Cresnet wiring. When calculating the wire gauge for a particular network run, the length of the run and the power factor of each network unit to be connected must be taken into consideration. If network units are to be daisy-chained on the run, the power factor of each network unit to be daisy-chained must be added together to determine the power factor of the entire chain.
Touchpanel with Dual Joysticks Crestron CPC-2000A (Doc. 5682). Pinout notations are provided on these documents. The wiring documents can be obtained from the Downloads page (CABLES and MANUALS Libraries) of the Crestron website (www.crestron.com). Search for the CRESNET.PDF and MODULAR.PDF files. Refer to the hookup diagram below for proper connections of the CPC-2000A to the control system. Other than making the power connection last, complete the connection in any order.
Crestron CPC-2000A Touchpanel with Dual Joysticks 2. Select Tools | ViewPort to open the “Crestron Performance Viewport” dialog box. 3. Select Functions | Set Network ID. The software checks the baud rate and then opens the “Set Network ID” dialog box. 4. Notice the list of current network devices in the dialog box. Highlight the CPC-2000A. 5. The NET ID of the CPC-2000A (default is 30H) appears in the box below the list. Use the scroll arrow to assign another NET ID. 6.
Touchpanel with Dual Joysticks Crestron CPC-2000A Diagnostics Menu Diagnostics Menu The DIAGNOSTICS button from the Main Menu should only be used under supervision from a Crestron technical support representative during telephone support. The options available from the Diagnostics Menu, shown to the left of this paragraph, are numeric in nature and its interpretation is beyond the scope of this manual. Select the RETURN button, located at the lower right corner, to get back to the Main Menu.
Crestron CPC-2000A Touchpanel with Dual Joysticks touchpanel on the network forces the same page change to all enabled touchpanels. Panel tracking is disabled when the PANEL TRACKING button is deselected. When disabled a given touchpanel does not respond to page changes made to other touchpanels on the network. Panel tracking is factory set with the PANEL TRACKING button deselected.
Touchpanel with Dual Joysticks Crestron CPC-2000A Save Setup and Run Program The SAVE SETUP AND RUN PROGRAM button, located at the upper right corner of the Main Menu, saves all of the setup information to EPROM and displays the main page that has been programmed into your system. Programming The touchpanel component of the CPC-2000A is programmed as if it were a CT-1600 touchpanel.
Crestron CPC-2000A Touchpanel with Dual Joysticks Reserved Join Numbers for the CPC-2000A JOIN NUMBER FUNCTION VALUE 1016 1017 1018 1019 1035 Backlight Brightness Brightness Brightness Call up Setup Menu Off Low Medium High N/A Sample Program NOTE: Rather than presenting an illustrative example with SIMPL Window screen shots in this documentation, please refer to the zipped file available from the Crestron website.
Touchpanel with Dual Joysticks Crestron CPC-2000A CPC-2000A Troubleshooting POSSIBLE CAUSE(S) TROUBLE Project can not be uploaded to the touchpanel. Wrong screens appear on touchpanel. CORRECTIVE ACTION Touchpanel has powered down. NET ID on touchpanel is improperly set. Power panel with power pack when programming and uploading project. Verify that NET ID match. Refer to "Interface Menu" in this Operations Guide and NET ID parameters assigned in the software program.
Crestron CPC-2000A Touchpanel with Dual Joysticks Further Inquiries If after reviewing this Operations Guide for the CPC-2000A, you can not locate specific information, please take advantage of Crestron’s award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Touchpanel with Dual Joysticks Crestron CPC-2000A Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
Crestron CPC-2000A Touchpanel with Dual Joysticks If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Touchpanel with Dual Joysticks Crestron CPC-2000A Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron CPC-2000A Touchpanel with Dual Joysticks This page intentionally left blank. Operations Guide - DOC.
Touchpanel with Dual Joysticks Crestron CPC-2000A This page intentionally left blank. 18 • Touchpanel with Dual Joysticks: CPC-2000A Operations Guide - DOC.
Crestron CPC-2000A Touchpanel with Dual Joysticks This page intentionally left blank. Operations Guide - DOC.
