- Crestron C2N-VEQ4 Volume Control Manual

Crestron C2N-VEQ4 Cresnet 4-Channel Digital Volume Control
Operations Guide - DOC. 6135A Cresnet 4-Channel Digital Volume Control: C2N-VEQ4 • 1
Cresnet 4-Channel Digital Volume
Control: C2N-VEQ4
Introduction
Features and Functions
The Crestron
®
C2N-VEQ4 Cresnet
®
4-Channel Digital Volume Control module is a
digitally controlled 4-channel audio processor that incorporates volume, tone, mixer
and equalization capabilities. Each channel has independent settings for volume,
treble, bass, mute, and mixer controls plus a 12-band parametric equalizer.
Volume/tone controls are compatible with both X-Generation and 2-Series control
systems. Equalization and mixer controls are only accessible from 2-Series
processors.
Refer to the simplified block diagram provided on the next page.
Functional Summary
Volume, bass, and treble ramp times, scaling, preset levels, and volume muting may
be specified on a per-channel basis. All of these aspects are software controllable.
Volume, bass, and treble control may be sent to more than one channel via software
to support stereo applications.
• Four balanced/unbalanced audio I/O channels
• 24-bit 96KHz A/D and D/A converters with dual DSPs provide
improved audio quality
• Independent settings for volume, treble, bass, and mute per channel
• 4 x 4 matrix mixer controls set the percentage of each input desired at
each output (any input to any output)
• Five modes of audio equalization per channel
- a ten-band graphic equalizer and two-band parametric equalizer
- a five-band graphic equalizer and seven-band parametric equalizer
- a speech-optimized five-band graphic equalizer and seven-band
parametric equalizer
- a three-band graphic equalizer and nine-band parametric equalizer
- a full twelve-band parametric equalizer
• Touch settable ID capable