Crestron DTT-15V2 DualTouch™ Technology Touchpanel Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Contents DualTouch™ Technology Touchpanel: DTT-15V2 1 Introduction ........................................................................................................................1 Features and Functions .............................................................................................................. 1 Specifications .....................................................................................................................
DualTouch™ Technology Touchpanel Crestron DTT-15V2 DualTouch™ Technology Touchpanel: DTT-15V2 Introduction Features and Functions The DTT-15V2 is a 15-inch touchpanel designed for use with the UPX-2 Universal Presentation System. The Crestron® exclusive DualTouch™ Technology (patent pending) allows the DTT-15V2 to function both as a touchpanel and a pen-based annotation device to produce an amazingly flexible presentation solution.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel DTT-15V2 DualTouch Technology Touchpanel and UPX-2 Universal Presentation Processor Typical Application 2 y DualTouch™ Technology Touchpanel: DTT-15V2 Operations Guide – DOC.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Specifications The following table provides a summary of specifications for the DTT-15V2. DTT-15V2 Specifications SPECIFICATION Power Requirements DETAILS 24 Watts (2.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel Physical Description The electronic hardware is housed in a black molded plastic enclosure, shown in the following illustration. This touchpanel is designed for placement on a counter. It possesses an adjustable stand, which can tilt from 15 to 72 degrees. All video and power connections are made at the rear of the unit. Each DTT-15V2 LCD panel is produced under very stringent quality control standards.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 DTT-15V2 Physical View – Front DTT-15V2 Physical View – Side (Maximum and Minimum Height) Operations Guide – DOC.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel DTT-15V2 Physical View – Rear (Stand Not Shown) The DTT-15V2 is shipped with the following accessories. One Pen (with five tip replacements) One USB Cable Approximately 6-feet long. One VGA to VGA Cable Approximately 6-feet long. One Power Supply and Power Cable 6 y DualTouch™ Technology Touchpanel: DTT-15V2 Operations Guide – DOC.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 One Pen Tether Ports The ports are located on the rear of the DTT-15V2. USB 2.0 One Universal Serial Bus (USB) type “B” female connector is provided for data transfer, and may be connected to any of the four USB ports on the UPX-2. USB Type B Connector Pinout Operations Guide – DOC.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel Power Adaptor Connector One DC IN connector provides connection for the power supply, 24 Watts (2.0 Amps @ 12 Volts DC, power supply included). RGB IN One DB15HD RGB (VGA) female connector is provided for video input.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Controls and Indicators A power on/off switch and a power LED are located in the upper right corner of the DTT-15V2. The DTT-15V2 conforms to VESA and ENERGY STAR® power savings guidelines. When using this device with a VESA Display Power Management Signaling (DPMS) compliant computer or graphics card, the DTT-15V2 automatically complies with the following power saving parameters.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel CAUTION: To avoid damage to the DTT-15V2 or to your video card, never connect or disconnect the video or power cable while the DTT-15V2 or the UPX-2 are powered up. NOTE: The maximum continuous current from equipment under any external load conditions shall not exceed a current limit that is suitable for the minimum wire gauge used in interconnecting cables.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Connecting the DTT-15V2 to the UPX-2 Display Settings Four controls are located on the upper right front side of the DTT-15V2 for display setup. Display Controls The Menu button provides access to the following 11 adjustment menus. Use the Selection (-)/(+) buttons to select a menu or advance forward or backward through the 11 menus. Press the Enter button to open and save the selected menu. 1. Operations Guide – DOC.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel 2. Brightness – Use the (-)/(+) buttons to decrease or increase brightness, press the Enter button to save. Default is 60. 3. Phase – Use the (-)/(+) buttons to manually reduce horizontal distortion lines. The Reset option to save. Default is 132. 4. is used for automatic adjustment. Press Enter Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. The Reset option is used for automatic adjustment. Press Enter to save.
DualTouch™ Technology Touchpanel 5. Crestron DTT-15V2 Horizontal Center – Use the (-)/(+) buttons to manually move the image left or right. The Reset option Enter to save. Default is 50. 6. Vertical Center – Use the (-)/(+) buttons to manually move the image down or up. The Reset option to save. Default is 50. 7. Operations Guide – DOC. 6342 is used for automatic adjustment. Press is used for automatic adjustment.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel 8. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1 through 6). Use RECALL to reset all screen options to the factory default. Select the exit icon to leave this menu without making any changes. 9. Backlight – Use the (-)/(+) buttons to decrease or increase the backlight brightness. Press Enter to save. Default is 80. 10.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 NOTE: Manual changes invalidate the standard profile settings. 11. Language – Use the (-)/(+) buttons to select a language for the display adjustment menus. Press Enter to save. Default is English. The Kensington® Security Slot The Kensington Security Slot is an industry standard that gives customers the best option for the physical security of computer and electronic equipment. The security slot is marked with a lock and K icon.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel Cleaning Keep the pen and screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the screen surface. Regular cleaning will help to prolong the life of your equipment. • To clean the outer casing, stand, and pen, use a soft cloth and a mild detergent (such as dishwashing liquid) diluted in water. Do not use paint thinner, benzene, alcohol or other solvents.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DTT-15V2 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION The DTT-15V2 is not receiving power. The Power LED is off. Verify cable connections and power to unit. The DTT-15V2 is receiving power. The Power LED is on.
Crestron DTT-15V2 DualTouch™ Technology Touchpanel Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices.
DualTouch™ Technology Touchpanel Crestron DTT-15V2 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose aa note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6342 02.05 Specifications subject to change without notice.