- Crestron ElectronicsMPC Media Presentation Controller Installation and Operations Guide

Crestron MPC-M10/20/25 Media Presentation Controller
MPC Media Presentation
Controller™: MPC-M10/20/25
Purpose
The purpose of this addendum is to provide additional information not supplied with
the original MPC-M10/20/25 Operations & Installation Guide (Doc. 6701B).
Specifically, this addendum provides for additional “Available Accessories” in the
MPC-M10/20/25 “Specifications” table, which appeared on page 7.
Specifications
In the “Specifications” section, the “Available Accessories” information should read
as follows:
Available Accessories
C2N-MNETGW infiNET Gateway
C2N-VEQ4 4-Channel Volume/EQ Module
CLS-C6(M) iLux Integrated Lighting System
CLW-DIM Series Wall Mount Dimmers
CLW-DIM1RF infiNET Dimmer
CLW-SW Series Wall Mount Switches
CLW-SW1RF infiNET Switch
CNSP-XX Custom Serial Interface Cable
IRP2 IR Probe
MP-B10 Media Presentation Button Panel B10
MP-B20 Media Presentation Button Panel B20
MP/MPC/IPAC_FRONT_LABEL-
(BLANK, ENGRAVED)-B-T
Set of custom engravable backlit labels,
white on black
MP/MPC/IPAC_FRONT_LABEL-
(BLANK, ENGRAVED)-W-T
Set of custom engravable backlit labels,
black on white
Crestron Electronics, Inc. Addendum #1 for DOC. 6701B
15 Volvo Drive Rockleigh, NJ 07647 09.08
Tel: 888.CRESTRON
Fax: [phone] Specifications subject to
www.crestron.com change without notice.