Crestron MT-1000C 3.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron MT-1000C 3.8 Inch RF Remote Contents 3.8 Inch RF Remote: MT-1000C 1 Introduction ..........................................................................................................1 Features and Functions...........................................................................1 Specifications .........................................................................................2 Physical Description...............................................................................
Crestron MT-1000C 3.8 Inch RF Remote 3.8 Inch RF Remote: MT-1000C Introduction Features and Functions The MT-1000C MiniTouch provides an eye-catching 3.8” active matrix touchscreen with 16 backlit hard buttons (including the 4-way thumbpad) in a sleek, stylish RF wireless handheld package. Its lightweight ergonomic design affords comfortable and intuitive handheld or tabletop use with a perfect combination of tactile pushbutton control and touchpanel versatility.
3.8 Inch RF Remote Crestron MT-1000C Specifications Specifications for the MT-1000C are given in the following table. MT-1000C Specifications SPECIFICATION DETAILS Power Requirements for Docking Station 100 – 250 VAC, 50/60 Hz, 0.
Crestron MT-1000C 3.8 Inch RF Remote NOTE: Crestron software and any files on the website are for Authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users are required to register to obtain access to certain areas of the site (including the FTP site). Physical Description Refer to the following physical views. The touchpanel and buttons are available on the top of the MT-1000C. The battery compartment and battery charge contacts are located on the bottom.
3.8 Inch RF Remote Crestron MT-1000C Physical Dimensions – MT-1000C Top, Side and Front Views Physical Dimensions – Docking Station 4 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC.
Crestron MT-1000C 3.8 Inch RF Remote MT-1000C Controls and Ports Programmable Buttons The MT-1000C has 13 programmable buttons. Programmable Button Locations • VOL Up/Down (1 and 2) • CH Up/Down (3 and 4) • MUTE (5) • INFO (6) • Thumb pad with UP (7), RIGHT (8), DOWN (9), LEFT (10), and SELECT (11) • MENU (12) • EXIT (13) NOTE: Button numbers are for programming purposes only. Refer to the latest version of the MT-1000C Programming Guide (Doc.
3.8 Inch RF Remote Crestron MT-1000C NOTE: For detailed programming information, refer to the latest version of the MT-1000C Programming Guide (Doc. 6330), which is available from the Crestron website. MT-1000C Docking Station Indicators and Port The MT-1000C has two indicators and one port on the docking station. • POWER Indicator – Red LED indicates power is applied to docking station input. • STATUS Indicator – Red LED indicates charging, blue LED indicates fully charged.
Crestron MT-1000C 3.8 Inch RF Remote 4. Place the battery in the opening, ensuring that the battery wires will not be pinched when you replace the battery cover. 5. Replace the battery cover and rotate the locking screw counterclockwise to lock. NOTE: A replacement battery may be ordered from Crestron. Use part number 6002767. Docking Station Setup Plug the power supply (included) into an AC power outlet using the AC line cord provided.
3.8 Inch RF Remote Crestron MT-1000C Place the MT-1000C in the cradle of the docking station and press down until you hear a click. When the MT-1000C is properly seated on the docking station, the Status LED lights up red while the battery is charging. The status LED turns blue when the battery is fully charged. MT-1000C on Docking Station User Configuration Menus To display the User Configuration screens, press and hold the MAIN button for five seconds.
Crestron MT-1000C 3.8 Inch RF Remote NOTE: The configuration screen automatically times out after 30 seconds of inactivity and returns to normal operation. Backlight Adjust the timeout of the backlight both on and off the docking station (cradle). You can select up to three minutes for on the battery operation and up to four minutes for on the docking station operation. Bright Adjust the display brightness slider. NOTE: A brighter display reduces battery life. Operations Guide – DOC. 6322 3.
3.8 Inch RF Remote Crestron MT-1000C Button Light Buttons can be backlit when touched, or always off to conserve battery life. Sound Adjust the volume of programmed audio. Date & Time Set the date and time. 10 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC.
Crestron MT-1000C 3.8 Inch RF Remote Power Displays the remaining charge and sets the low battery indication level. System Displays system memory and version information. Pickup Sets the MT-1000C to turn on when picked up or moved. Operations Guide – DOC. 6322 3.
3.8 Inch RF Remote Crestron MT-1000C Calibration Calibrates the touchscreen. Use a stylus or pen top (not a finger) and follow the directions on the screen. Factory Default Resets the memory to the factory condition. WARNING: All programming will be lost. Do not use this button unless directed to do so by technical support personnel. Exit The Exit button returns the MT-1000C to normal operation.
Crestron MT-1000C 3.8 Inch RF Remote Care and Maintenance • To avoid scratching the touchscreen, do not use a pen, pencil, or any sharp object. Use a plastic pen top, PDA stylus, or your finger. • The MT-1000C is not waterproof. Avoid using it in damp or wet locations. • Keep the MT-1000C away from extreme heat or cold. • The touchscreen contains a glass element; avoid dropping or impacting against anything.
3.
Crestron MT-1000C 3.8 Inch RF Remote Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6322 12.04 Specifications subject to change without notice.
