Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Installation Guide
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Contents Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW 1 Description................................................................................................................................. 1 Setup .......................................................................................................................................... 4 Mounting ........................................................................
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Description The PMK-6X-DSW is a pre-construction mount kit for the TPS-6X-DSW Wall Mount Docking Station. The PMK-6X-DSW is used for installation on a stud. For custom placement of the TPS-6X-DSW without a stud, use the WMKT-6X-DSW or WMKM-6X-DSW.
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW The dimensions of the PMK-6X-DSW are shown below and on the following page. Dimensional Drawing (1 of 2) 0.56 in (1.42 cm) 11.90 in (30.23 cm) 8.00 in (20.32 cm) 0.06 in (0.15 cm) #06-32 TAPPED HOLE IN EACH CORNER 8.82 in (22.41 cm) 6.35 in (16.
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Dimensional Drawing (2 of 2) 8 15/16 in (226 mm) 7 3/4 in (196 mm) 1/2 in (13 mm) 1/8 in (4 mm) 3/16 in (5 mm) 6 3/4 in (171 mm) 6 in (152 mm) 1/2 in (13 mm) 5 in (127 mm) 6 3/16 in (158 mm) 6 1/8 in (156 mm) 5 13/16 in (148 mm) Dimensional Drawing - Cover Plate 5.85 in (14.86 cm) 4.16 in (10.57 cm) 0.02 in (0.05 cm) Installation Guide – DOC.
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Setup Mounting The PMK-6X-DSW consists of a single metal plate, which fastens to the stud of a framed wall prior to hanging drywall. Standard drywall nails or screws to attach the PMK-6X-DSW are not supplied (length can vary). The plate is designed to provide the necessary support for the TPS-6X-DSW and can mount to the right or left side of a stud. Confirm that the PMK-6X-DSW is level before applying drywall.
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation) NOTE: BE SURE TO LEAVE THE FOUR TAPPED HOLES ON THE FRONT OF THE PLATE EXPOSED TO ACCEPT THE MOUNTING SCREWS. NOTE: MOUNTING PLATE IS TO BE COVERED WITH DRYWALL AND THEN CUTOUT MADE AROUND THE INSIDE OF THE OPENING.
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Installation Complete the installation by either installing the wall mount docking station, leaving the hole open (if permitted by local building codes) or installing the optional cover plate with the included #06-32 x 1-1/2” screws. If the TPS-6X-DSW is to be installed, refer to the latest revision of the TPS-6X-DSW Operations and Installation Guide (Doc. 6708) for installation instructions.
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Other Mounting Option Accessories If too much of the mounting plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: • MMK-6X-DSW (Doc. 6779) - for larger repairs and to fill in larger irregularities around the opening (requires plastering). • TMK-6X-DSW (Doc. 6780) - for smaller repairs and to provide a smooth edge at the opening.
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Resources Industry Compliance As of the date of manufacture, the PMK-6X-DSW has been tested and found to comply with specifications for CE marking. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6778A (2023089) 01.09 Specifications subject to change without notice.