This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron ST-DS Docking Station/Charger Contents Docking Station/Charger: ST-DS 1 Description .......................................................................................................................... 1 Functional Description ........................................................................................... 1 Physical Description............................................................................................... 2 Setup..................................................
Crestron ST-DS Docking Station/Charger Docking Station/Charger: ST-DS Description Functional Description The ST-DS is a microprocessor-based docking station designed to fast charge the ST-BTP (rechargeable power pack). A fast charge occurs in one of three possible configurations and can take between two and three hours (depending on whether the ST-BTP is fully discharged and the amount of current drawn during the charging process).
Docking Station/Charger Crestron ST-DS Physical Description The ST-DS, shown on the next page, is housed in a black enclosure with silkscreened labels on the front panel and cavity (docking area) of the unit. On the front panel there are three LEDs for indicating the unit’s current status. The cavity accommodates either the ST-BTP with optional ST-DS charging guide or, in some cases, a Crestron wireless touchpanel with ST-BTP installed. The only wired connection is made to the bottom of the unit.
Crestron ST-DS Docking Station/Charger ST-DS Port The only port is provided on the bottom of the ST-DS. This DC power socket connector is used to supply power via the external power pack. ST-DS Power Port POWER CONNECTOR SIDE VIEW BOTTOM VIEW ST-DS Indicators There are three LED indicators located on the front panel of the ST-DS. Refer to the illustration and descriptions after this paragraph.
Docking Station/Charger Crestron ST-DS Setup Power Source The ST-DS has a DC power socket connector on the bottom of the unit. This power connector is used to supply power via an external power pack. Crestron recommends a power pack for the ST-DS. It is available under Crestron part number PW-1215 (110v USA and Canada) or PWI-1215 (220v International). If an external power pack other than these Crestron models is obtained, verify that it meets the required specifications and polarity as shown below.
Crestron ST-DS Docking Station/Charger Charging the ST-BTP (Alone) CONTACTS ST-BTP RECHARGABLE POWER PACK ST-DS SHOWN WITH OPTIONAL CHARGING GUIDE Method 2: ST-BTP Installed in an Inactive Touchpanel NOTE: Do not use the optional charging guide when charging the ST-BTP while installed in the touchpanel. NOTE: This method only applies to certain Crestron wireless touchpanels. In this method, the ST-BTP is properly installed into the touchpanel.
Docking Station/Charger Crestron ST-DS Method 3: ST-BTP Installed in an Active Touchpanel This method is identical to method 2, except that the touchpanel is active (ON) while charging. As a result, the time to fully charge a discharged ST-BTP can take up to three hours. Fully Discharging the ST-BTP Due to the memory effect of nickel-cadmium (NiCad) cells, Crestron recommends that the ST-BTP be fully discharged for every 25 charge/discharge cycles.
Crestron ST-DS Docking Station/Charger Further Inquiries If after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Docking Station/Charger Crestron ST-DS Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron ST-DS Docking Station/Charger Glossary of Terms External 1500 mA Power Pack This is the only power supply recommended by Crestron for the ST-DS. Use of other power sources may damage the ST-BTP. Memory Effect NiCad batteries develop a memory condition known as the “memory effect”. If the ST-BTP is continually recharged before being fully discharged, the unit learns not to maintain a full charge. This can be avoided by fully discharging the ST-BTP every 25 charging cycles.
Docking Station/Charger Crestron ST-DS This page intentionally left blank. 10 • Glossary of Terms Operations Guide - DOC.
Crestron ST-DS Docking Station/Charger This page intentionally left blank. Operations Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 5738A 04.01 Specifications subject to change without notice.
Crestron ST-DS Operations Guide - DOC.