Crestron TPS-6X-DS Docking Station for the TPS-6X Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
Crestron TPS-6X-DS Docking Station for the TPS-6X Contents Docking Station for the TPS-6X: TPS-6X-DS 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron TPS-6X-DS Docking Station for the TPS-6X Docking Station for the TPS-6X: TPS-6X-DS Introduction The TPS-6X-DS is the desktop docking station that is included as standard with the Isys® TPS-6X Wireless Touchpanel. Placing the touchpanel onto the TPS-6X-DS converts it to a stylish tilt touchpanel, providing wired communications and video capability while charging the touchpanel’s internal battery.
Docking Station for the TPS-6X Crestron TPS-6X-DS Triple-Lock Tilt Mechanism The tiltable docking port on the TPS-6X-DS allows the touchpanel to be tilted at any angle up to 45 degrees for optimal viewing and operation. The angle can be freely adjusted during use or locked down at a fixed angle. A finger-operated latch can be engaged at any time to lock the touchpanel securely to the docking station or left unlocked for easiest removal after recharging.
Crestron TPS-6X-DS Docking Station for the TPS-6X Physical Description This section provides information on the connections, controls and indicators available on your TPS-6X-DS. TPS-6X-DS Physical View TPS-6X-DS Overall Dimensions (Front View) 1 4.25 in (10.80 cm) Operations Guide – DOC.
Docking Station for the TPS-6X Crestron TPS-6X-DS TPS-6X-DS Overall Dimensions (Top View) 7.03 in (17.84 cm) 6.53 in (16.57 cm) 6.96 in (17.67 cm) 2 NOTE: The length of the connecting cable on the TPS-6X-DS is 9 feet (2.75 meters). The length of the cable has been shortened for illustrative purposes in the diagram above. 4 • Docking Station for the TPS-6X: TPS-6X-DS Operations Guide – DOC.
Crestron TPS-6X-DS Docking Station for the TPS-6X Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS 1 TOUCHPANEL CONNECTOR 2 INTERFACE MODULE CONNECTOR2 DESCRIPTION (1) 10-pin connector for connecting to touchpanel. (1) Integral 9 foot (2.75 meter) cable with 10-pin RJ-50 male connector; Connects to TPS-6X-IMCW Interface Module (included).
Docking Station for the TPS-6X Crestron TPS-6X-DS Setup Hardware Hookup The only connection to the TPS-6X-DS is via the fixed cable, which is connected to the TO PANEL port on the (included) TPS-6X-IMCW Interface Module. When connecting the TPS-6X-DS, consider the following: • Use Crestron® power supplies for Crestron equipment. • The included cable cannot be extended.
Crestron TPS-6X-DS Docking Station for the TPS-6X Operation Mounting the Touchpanel To mount the TPS-6X, the touchpanel must first be positioned onto the docking station at a slight angle to latch the top portion of the docking station onto the touchpanel. Magnets on the TPS-6X-DS attach to metal plates installed on the TPS-6X to secure the touchpanel in place (refer to the illustration below).
Docking Station for the TPS-6X Crestron TPS-6X-DS Operating Modes The TPS-6X-DS can be configured into a lock mode or unlock mode to either secure or release the TPS-6X touchpanel. The touchpanel can also be configured to permanently lock the touchpanel onto the TPS-6X-DS using a locking pin accessory. Lock Mode Pull the latch toward the touchpanel or the user as indicated in the illustration below. When in lock mode, the touchpanel cannot be docked or undocked from the TPS-6X-DS.
Crestron TPS-6X-DS Permanent Lock Mode Docking Station for the TPS-6X Ensure the touchpanel is securely placed on the docking station and placed in lock mode. Then slide the locking pin accessory straight through the slot of the latch of docking station until the locking pin clicks into place (refer to the illustrations below). The locking pin can be installed from the left or right side of the docking station with the snap of the pin facing in or out of the slot on the latch.
Docking Station for the TPS-6X Crestron TPS-6X-DS Resources As of the date of manufacture, the TPS-6X-DS has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876].
Crestron TPS-6X-DS Docking Station for the TPS-6X Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6576B (2018618) 08.08 Specifications subject to change without notice.
