User Manual
Table Of Contents
- Isys i/O® 2.8” Handheld WiFi Touchpanel: TPMC-3X
- Introduction
- Setup
- Identity Code
- Battery Installation
- Power
- Battery Calibration
- Configuring the Touchpanel
- General Use and Safety
- Recommended Cleaning
- Programming Software
- Uploading and Upgrading
- Problem Solving
- Appendix: TBD
- Software License Agreement
- Return and Warranty Policies
Crestron TPMC-3X Isys i/O
®
2.8” Handheld WiFi Touchpanel
buttons act as the up and down arrow keys (use to select items in a list box). The ▲
and ▼ buttons can be used to move the cursor within a text string.
WiFi Access Point
From the WiFi Setup screen, touch WiFi Access Point to display the Wireless
Information screen, which allows you to set up the parameters used to communicate
with the control system via a wireless access point (WAP). Crestron recommends
using a dedicated CEN-WAP-ABG-1G or CEN-WAP-ABG-CM (both sold
separately) for each TPMC-3X in the system.
Wireless Information Screen
A list of available access points in shown. Use the volume up/down buttons to scroll
through the list. Select the access point and touch Edit to configure. With DHCP
enabled, simply enter your Network key.
Touch the appropriate hard key for Tab>> or <<Tab to navigate editable fields.
Touch the appropriate hard key for OK to save settings or for Cancel to exit without
saving.
Wireless Information Editing Screen
Operations Guide – DOC. 6789C Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X • 17