User Manual
Table Of Contents
- Isys i/O® 2.8” Handheld WiFi Touchpanel: TPMC-3X
- Introduction
- Setup
- Identity Code
- Battery Installation
- Power
- Battery Calibration
- Configuring the Touchpanel
- General Use and Safety
- Recommended Cleaning
- Programming Software
- Uploading and Upgrading
- Problem Solving
- Appendix: TBD
- Software License Agreement
- Return and Warranty Policies
Crestron TPMC-3X Isys i/O
®
2.8” Handheld WiFi Touchpanel
System Msgs Enabled
From the main setup screen, touch System Msgs Enabled to permit display of
system messages.
About
From the main setup screen, touch About to display a screen that shows software
and OS version information. Touch OK to remove the About screen.
Brightness Options
These setup options control the appearance of the TPMC-3X.
LCD Settings
From the main setup screen, touch LCD Settings to enter the Display Settings
screen, with controls for screen brightness when the TPMC-3X is docked and when
it is undocked. Lower brightness settings extend battery life. This screen also allows
you to turn the Hardkey Wakes LCD option On or Off. When On, pressing a hard
key or tilting the panel will turn on the LCD display if the display is off. Touch Back
to return to the main setup screen.
Display Settings Screen
Operations Guide – DOC. 6789C Isys i/O
®
2.8” Handheld WiFi Touchpanel: TPMC-3X • 27