User Manual

infiNET™ Thermostat Crestron CHV-TSTATRF
2. Once in SETUP mode, the display will indicate the currently selected
“Setup Parameter/Function”. Press and release the MODE button quickly
(must be released within one second) to change to the next
Parameter/Function in the list. When “UA” is displayed, the CHV-TSTAT is
ready to release the gateway.
3. Press either RAISE or LOWER to execute the gateway release function.
4. To exit from SETUP mode, press the FAN button on the CHV-TSTATRF.
NOTE: While the release is in progress, the unit will display a flashing “--”. When
the release is finished, the unit will display “00”.
12 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490