User Manual

infiNET™ Thermostat Crestron CHV-TSTATRF
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication.
Establishing Communication
Use Crestron Toolbox for communicating with the CHV-TSTATRF; refer to the
Crestron Toolbox help file for details. There is a single method of communication:
indirect serial communication.
Indirect Serial Communication
PC RUNNING
CRESTRON TOOLBOX
CONTROL SYSTEM
CHV-TSTATRF
SERIAL,
ETHERNET
OR USB
infiNETC2N-MNETGW
CRESNET
• CHV-TSTATRF connects to the C2N-MNETGW (Gateway), which
connects to the control system via Cresnet
®
.
• Establish communications between the PC and the control system as
described in the latest version of the 2-Series Control Systems Reference
Guide (Doc. 6256), which is available from the Crestron website
(http://www.crestron.com/manuals
).
Programs and Firmware
• Display the network device tree (Tools | Network Device Tree) to show all
network devices connected to the control system. Right-click on the
CHV-TSTATRF to display actions that can be performed on the
CHV-TSTATRF:
Upgrade firmware ⇒
⇒ Change MNET ID
• Upload the SIMPL Windows file to the control system using SIMPL
Windows or Crestron Toolbox.
16 • infiNET™ Thermostat: CHV-TSTATRF Operations & Installation Guide – DOC. 6490