User Manual

Crestron CHV-TSTATRF infiNET™ Thermostat
Specifications
Specifications for the CHV-TSTATRF are listed in the following table.
CHV-TSTATRF Specifications
SPECIFICATION DETAILS
Wireless
RF Transceiver
Two-way RF, 2.4 GHz ISM Channels 11-26
(2400 to 2483.6 MHz),
IEEE 802.15.4 compliant
RF Output Power 10 mW
Range (typical)
150 feet indoor, 250 feet outdoor, subject to
site-specific conditions; range is increased
by adding additional devices or
C2N-MNETRPT repeater; C2N-MNETGW
gateway/transceiver required (sold
separately)
Display
Backlit LCD with two large seven-segment
digits, two small seven-segment digits, 14
dedicated symbols;
Displays ambient temperature, setpoint,
system mode, fan setting, call activity, low
battery, RF or control system
communication errors, firmware download
progress, setup parameter/function and
value
Measurement Range
Ambient Temperature -10º to 110ºF (-23º to 43ºC)
Display Limits -9º to 99ºF (-9º to 43ºC)
Setpoint Range
Heat only setpoint 38º to 89ºF (3º to 32ºC)
Cool only setpoint
59º to 99ºF (15º to 37ºC) or 38º to 99ºF
(3º to 37ºC) extended cool mode enabled
Environmental
Temperature -10º to 110ºF (-23º to 43ºC)
Humidity 10% to 90% RH (non-condensing)
Power Requirements
0.24 Watts (10 mA @ 24 Volts DC)
supplied by heating or cooling system
Battery
Two AA batteries required (included)
estimated one year normal operation
Default MNET ID
1
01
Minimum 2-Series Control
System Update File
2, 3
Version 3.137 or later
Housing
Injection molded plastic, surface-mountable
to the front of a horizontally oriented single-
gang electrical box.
Dimensions
Height 4.50 in (11.43 cm)
Width 5.53 in (14.05 cm)
Depth 1.03 in (2.60 cm)
(Continued on following page)
Operations & Installation Guide – DOC. 6490 infiNET™ Thermostat: CHV-TSTATRF • 3