User's Manual

Crestron CWD1014 Two-Way RF Transceiver Module
Operations Guide - DOC. 6658 Two-Way RF Transceiver Module: CWD1014 • 7
Setup
Hardware Hookup
Refer to the hookup diagram below, which shows the connections made to the
module. Complete the connections in any order.
NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
Hookup Connections for CWD1014
ANTENNA:
TRANSMITS
AND RECEIVES
RF SIGNALS
POWER-I/O:
PROVIDES
POWER AND
SYSTEM
INTERFACE
For more information on these connectors, refer to “Ports” on page 3.