User's Manual

Crestron CWD1014 Two-Way RF Transceiver Module
Operations Guide - DOC. 6658 Two-Way RF Transceiver Module: CWD1014 • 1
• Two-way RF transceiver
− 2.4 GHz frequency band, IEEE 802.15.4 specification
− Range from 3 feet to 100 ft.
− Operates on one of sixteen available channels to establish optimal
signal quality
Two-Way RF Transceiver Module:
CWD1014
Introduction
Functions and Features
The CWD1014 (hereafter referred to as “module”) is a two-way radio frequency
(RF) module that utilizes the 2.4 GHz frequency band to communicate with other
devices.
The module operates according to the IEEE 802.15.4 specification and can be
configured to minimize the possibility of interference with other devices.
The module receives RF signals from one or more Crestron devices and can transmit
these signals over the air or over a cable run for further processing (depending on the
application).
Functional Summary
The transceiver uses a 100 milliwatt signal that can travel up to approximately 100
feet indoors. The range is dependent on the construction of the building,
obstructions, and RF interference from other devices. The location of the module and
the orientation of its antenna are also important factors in determining RF
performance.