User's Manual

ManualsBrandsCrestron Electronics ManualsElectronicsHandheld Remote

quickstart guide

PLX3

Prodigy

Handheld Remote

QUICKSTART DOC. 7132 (2027729) 10.10

www.crestron.com/prodigy

888.273.7876 201.767.3400

change without notice.

All brand names, product names, and trademarks

are the property of their respective owners.

The Prodigy

PLX3 is a versatile yet cost effective home

theater remote control. This state of the art handheld

two-way controller includes a 2” active matrix

display capable of displaying stunning graphics and

dynamic text with true feedback.

The ergonomic layout of pushbuttons provides intuitive,

tactile control for hands and fingers of all sizes. Its

compact size and design offer easy one handed

operation, while its 802.15.4 wireless technology affords

reliable communications over everything from home

theater to whole house automation as part of a complete

Prodigy system.

Introduction

Install the Batteries

Configure the Touchpanel

The following diagram illustrates a PLX3 in a system with

other Prodigy devices.

Application

Install the four (4) AA alkaline batteries as shown in

the diagram located inside the battery compartment.

NOTE: Do not use rechargeable batteries.

The setup screen is the starting point for

configuring the PLX3. When power is applied

for the first time, the screen shown below

appears.

NOTE: During regular operation

of the remote, to activate the setup

functions, press MEDIA, LIGHTS,

GUIDE, and MENU in sequence

twice within a five second period.

Touch the screen to display the PLX3 setup

screen, as shown in the illustration below.

The setup screen enables basic configuration

procedures prior to regular operation of the

remote.

USB Port Location

NOTE: The USB port for loading

projects and upgrading firmware, is

located behind the battery compart-

ment cover on the rear of the unit.

For Regulatory Compliance information, refer to the latest

version of Doc. 7133.

Summary of content (2 pages)

PAGE 1
quickstart guide PLX3 1 Prodigy® Handheld Remote 3 Introduction The Prodigy® PLX3 is a versatile yet cost effective home theater remote control. This state of the art handheld two-way controller includes a 2” active matrix display capable of displaying stunning graphics and dynamic text with true feedback. 4 Install the Batteries Install the four (4) AA alkaline batteries as shown in the diagram located inside the battery compartment.
PAGE 2
quickstart guide PLX3 5 Prodigy® Handheld Remote Acquire the PLX3 7 Use the Prodigy Composer software (available for download from www.crestron.com/prodigycomposer) to configure your Prodigy system. A Prodigy Network Setup Wizard is included with Prodigy Composer. Before a PLX3 can be used, it must first be acquired by a PMC2 that is connected to a Prodigy system. To acquire the PLX3, perform the following when prompted by the Prodigy Network Setup Wizard. 1.