Crestron 1700C-BTNB-BEZEL Button Bezel Kit Operations & Installation Guide .
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron 1700C-BTNB-BEZEL Button Bezel Kit Contents Button Bezel Kit: 1700C-BTNB-BEZEL 1 Introduction......................................................................................1 Installation........................................................................................2 Problem Solving...............................................................................5 Troubleshooting.....................................................................5 Further Inquiries .................
Crestron 1700C-BTNB-BEZEL Button Bezel Kit Button Bezel Kit: 1700C-BTNB-BEZEL Introduction The Button Bezel Kit (1700C-BTNB-BEZEL) includes the material to add “quick” pushbuttons to a Crestron 1700 Series touchpanel. A total of ten pushbuttons, five on each side of the LCD screen, are included in the kit. Use these buttons to access any frequently used commands with or without waking the display.
Button Bezel Kit Crestron 1700C-BTNB-BEZEL NOTE: To successfully send a pushbutton command when the touchpanel display is dark, the user may have to press the pushbutton twice with a minimum two-second interval between presses. This method is preferred because when a panel display is inactive, the user cannot discern whether the panel is in a standby or power down state. Furthermore, a single pushbutton press may not be transmitted depending on the state of the unit.
Crestron 1700C-BTNB-BEZEL Button Bezel Kit bezel to the rest of the panel. If the bezel separates while rotating to its normal position, the internal parts of the panel may spill out.) Bottom View of Battery and Screws Screw Screw Battery 3. When in the normal position, lift the bezel from the touchpanel. 4. Cover each membrane switch actuator with pushbuttons. Observe that pushbuttons differ from each other by the markings on the back.
Button Bezel Kit Crestron 1700C-BTNB-BEZEL 5. Position the appropriate pushbuttons/membrane switch actuator assemblies on the sides of the display, as shown in the illustration. Edge alignment ensures that the openings in the bezel will properly fit over the pushbuttons when the bezel is attached in step 6.
Crestron 1700C-BTNB-BEZEL Button Bezel Kit Detail of Edge Alignment Align Edge 9. Reinstall the battery and verify that the pushbuttons function properly. Problem Solving Troubleshooting If one or more pushbuttons do not function as expected, there are two possible causes. 1. The touchpanel is an RF transceiver and is out of range. The solution is to bring the unit back into range. Refer to the “Out of Range Feature” section in the Operations Guide of the respective touchpanel for more information. 2.
Button Bezel Kit Crestron 1700C-BTNB-BEZEL Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices.
Crestron 1700C-BTNB-BEZEL Button Bezel Kit Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide - DOC. 6224A 08.04 Specifications subject to change without notice.