User Guide

Crestron Adagio™ AES Entertainment System

name of the CEN-IDOC will be used in place of “Source 5” in the list of

sources.

• To install an AAS, press the soft button labeled Yes and follow the

instructions onscreen. Otherwise, press the soft button labeled No. The

source names will be renamed as follows:

⇒

Source 7 becomes “Server 1”

1,2

Source 8 becomes “Server 2”

1,2

Source 9 becomes “Server 3”

Source 10 becomes “Server 4”

1: AAS-2 model

2: AAS-4 model

NOTE: When installing an AAS, only one AAS can be present on the

network.

• Press MENU to return to the Installer Tools menu.

Set the Number of Rooms

Set the number of rooms so the AES does not display unused rooms during

configuration and operation.

• Open Installer Tools as described on page 23, select Set Number of

Rooms, and press the ENTER button.

Set the Number of Rooms

Select the number of

Rooms that you will

be using:

SOURCE

ROOM

HOUSE

BKLT

SCHED

DISPLAY

• Use the selection knob to select the number of rooms. To cancel and return

to the Installer Tools menu, press MENU.

NOTE: With an AAE connected to the AES, the maximum number of

rooms that can be selected is 12 (when using out-of-the-box functionality).

• To confirm, press the ENTER button and return to the Installer Tools

menu.

Name Rooms

This screen allows you to customize the name of each room displayed on the LCD.

• Open Installer Tools as described on page 23, select Name Rooms, and

press the ENTER button.

Operations Guide – DOC. 6456A Entertainment System: Adagio AES • 25