User Guide

Crestron Adagio™ AES Entertainment System
• Turn the selection knob to select the source to be named and press the
ENTER button. To cancel and return to the Installer Tools menu, press
MENU.
Edit Source Name
Enter Name for Src. 1
1: S1 AM/FM
2: S1 XM
3: Source 3
Del < >
SOURCE
ROOM
HOUSE
MENU
BKLT
SCHED
DISPLAY
MORE
Done
• Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other character
is displayed on the LCD. Move the cursor to another position by pressing
the soft buttons labeled g and h. To delete a character, press the soft
button marked Del.
NOTE: The maximum length for any source name is 15 characters.
• After entering the new source name, press Done to save the name and
return to the list of sources. If all of the sources have been named/renamed,
press MENU to return to the Installer Tools menu.
Identify Keypads
This screen allows you to identify keypads and APAD devices that are connected to
the AES.
• Open Installer Tools as described on page 23, select Identify Keypads, and
press the ENTER button.
NOTE: Any attached AAE will automatically be identified by the AES
during this step.
Identify Keypads Warning
Identify Keypads
Warning: All keypads will
need to be re-identified
Continue?
No
SOURCE
ROOM
HOUSE
MENU
BKLT
SCHED
DISPLAY
MORE
Yes
• Press the soft button labeled Yes to proceed and clear previously stored
keypad identification data or press No to cancel.
Operations Guide – DOC. 6456A Entertainment System: Adagio AES • 27