Crestron BB-1000L Wall Mount Back Box Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron BB-1000L Wall Mount Back Box Contents Wall Mount Back Box: BB-1000L 1 Description................................................................................................................................. 1 Installation ................................................................................................................................. 2 Assembly ..................................................................................................................... 2 Mounting ...
Crestron BB-1000L Wall Mount Back Box Wall Mount Back Box: BB-1000L Description The BB-1000L is a pre-construction mounting option for the Series 1000 Wall Mounted Touchpanels and the APAD Wall Mount Controller. The table below lists all parts included with the BB-1000L.
Wall Mount Back Box Crestron BB-1000L Installation Assembly • Required Tools Procedure #2 Phillips tip screwdriver Complete the following assembly procedure in the order provided (refer to illustration below). 1. Remove knockouts as required. 2. Attach supplied #8 self-tapping screw to wall mount enclosure for grounding. 3. Attach mounting brackets to wall mount enclosure using supplied (4) #6-32 x ¼” screws. 4.
Crestron BB-1000L Wall Mount Back Box Mounting NOTE: This device must be installed in accordance with local building codes. Required Tools Procedure • #2 Phillips tip screwdriver • Level Complete the following procedure (refer to illustration below) to mount the assembly. 1. Position assembly to the front edge of the stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. 3.
Wall Mount Back Box Crestron BB-1000L 6. Complete the installation by either installing the device, leaving the hole open (if permitted by local building codes), or installing the supplied cover plate with #6-32 x 1½” screws. Refer to the illustration below. Mounted BB-1000L with Optional Cover Plate Installed 4.65 in (11.81 cm) 4.74 in (12.04 cm) Other Mounting Option Accessories If too much of the cover plate is exposed after the drywall is cut, you may need to patch the area.
Crestron BB-1000L Wall Mount Back Box Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number. List of Related Reference Documents DOCUMENT TITLE APAD Wall Mount LCD Controller LC-1000 BriteTouch® 3.
Wall Mount Back Box Crestron BB-1000L Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron BB-1000L Wall Mount Back Box This page is intentionally left blank. Installation Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6060A 2002104 07.06 Specifications subject to change without notice.