Crestron BB-15L Wall Mount Back Box Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
Crestron BB-15L Wall Mount Back Box Contents Wall Mount Back Box: BB-15L 1 Description................................................................................................................................. 1 Installation ................................................................................................................................. 3 Assembly ..................................................................................................................... 3 Mounting .......
Crestron BB-15L Wall Mount Back Box Wall Mount Back Box: BB-15L Description The BB-15L is a UL®-listed pre-construction mounting option for the Crestron Isys® TPS-15L and TPS-15G-L wall mounted touchpanels. The BB-15L can also be used with the Isys i/O™ TPMC-15-CH-L and TPMC-15-QM-L wall mounted touchpanels. The table below lists all parts included with the BB-15L.
Wall Mount Back Box Crestron BB-15L The dimensions of the BB-15L are shown in the following diagram. Dimensional Drawing (Fully Assembled without Cover Plate) 13.97 in (35.49 cm) 12.67 in (32.18 cm) 13.34 in (33.89 cm) 14.31 in (36.36 cm) 16.45 in (41.78 cm) 3.06 in (7.77 cm) BACK BOX (ASSEMBLED) 3.31 in (8.41 cm) 13.36 in (33.93 cm) 13.59 in (34.53 cm) COVER PLATE 2 • Wall Mount Back Box: BB-15L 0.03 in (0.08 cm) Installation Guide - DOC.
Crestron BB-15L Wall Mount Back Box Installation Assembly Required Tools: • #2 Phillips tip screwdriver Complete the following assembly procedure in the order provided (refer to illustration below). 1. Remove knockouts as required. 2. Attach the supplied #08-8B self-tapping screw to the enclosure assembly for grounding. 3. Attach upper and lower mounting brackets to the enclosure assembly using supplied (4) #6-32 x 1/4” screws. Assembly View #6-32 X 1/4"L PAN HEAD SCREW (2007213) QTY.
Wall Mount Back Box Crestron BB-15L Mounting Required Tools: • #2 Phillips tip screwdriver or hammer • Level Complete the following procedure (refer to illustration below) to mount the assembly. 1. Position the back box to the front edge of the stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. 3.
Crestron BB-15L Wall Mount Back Box Refer to the following illustration for cutout dimensions.
Wall Mount Back Box Crestron BB-15L Other Mounting Option Accessories If too much of the front of the back box is exposed after the drywall is cut, you may need to patch the area. Crestron offers the following accessories: • MMK-15L (Doc. 6364) - for larger repairs to and to fill in larger irregularities around the opening (requires plastering). • TMK-15L (Doc. 6365) - for smaller repairs and to provide a smooth edge at the opening.
Crestron BB-15L Wall Mount Back Box Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6362A (2013138) 11.05 Specifications subject to change without notice.