User Guide

Wall Mount Back Box for STX-1700CW Crestron BB-1700CW
4. As shown below, loosely install four pan head screws with washers
through the inside of the enclosure into the support bracket holes.
Tighten screws only finger-tight so that final adjustments may be
made during step 7 of this procedure.
Loosely Install Support Bracket
5. As shown below, loosely install four pan head screws with washers
through the inside of the enclosure into the mounting bracket holes.
Tighten screws only finger-tight so that final adjustments may be
made during step 7 of this procedure.
Loosely Secure Enclosure to Mounting Bracket
6. Feed the Cresnet wiring through the enclosure knockout.
4 • Wall Mount Back Box for STX-1700CW: BB-1700CW Installation Guide – DOC. 6105