Crestron BB-2000L Wall Mount Back Box Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.
Crestron BB-2000L Wall Mount Back Box Contents Wall Mount Back Box: BB-2000L 1 Description................................................................................................................................. 1 Installation ................................................................................................................................. 2 Assembly ..................................................................................................................... 2 Mounting ...
Crestron BB-2000L Wall Mount Back Box Wall Mount Back Box: BB-2000L Description The BB-2000L is a pre-construction mounting option for the TPS-2000L Compact Video Touchpanel. The table below lists all parts included with the BB-2000L.
Wall Mount Back Box Crestron BB-2000L Installation Assembly Required Tools: #2 Phillips tip screwdriver Complete the following assembly procedure in the order provided (refer to illustration below). 1. Remove knockouts as required. 2. Attach the supplied self-tapping pan Phillips (8B x ¼” length) screw to the wall mount enclosure for grounding. 3. Attach mounting brackets to wall mount enclosure using supplied (4) #6-32 x ¼” screws. 4.
Crestron BB-2000L Wall Mount Back Box Mounting NOTE: This device must be installed in accordance with local building codes. Required Tools: #2 Phillips tip screwdriver or hammer Level Complete the following procedure (refer to illustration below) to mount the assembly. 1. Position assembly to the front edge of the stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. 3.
Wall Mount Back Box Crestron BB-2000L Cutout Dimensions 47 16 in (135 mm) 65 16 in (160 mm) NOTE: Confirm that the four tapped holes in the mounting plate are exposed to accept the touchpanel mounting screws. 6. Complete the installation by either installing the touchpanel, leaving the hole open (if permitted by local building codes), or installing the supplied cover plate with #6-32 x 1½” screws. Refer to the illustration below. Mounted BB-2000L with Optional Cover Plate Installed 4.65 in. (11.
Crestron BB-2000L Wall Mount Back Box Other Mounting Option Accessories If too much of the cover plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: • MMK-2000L (Doc. 6025) - for larger repairs and to fill in larger irregularities around the opening (requires plastering). • TMK-2000L (Doc. 6026) - for smaller repairs and to provide a smooth edge at the opening.
Wall Mount Back Box Crestron BB-2000L Further Inquiries If after reviewing this Installation Guide for the BB-2000L, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron BB-2000L Wall Mount Back Box Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 5973A 01.03 Specifications subject to change without notice.
