User Guide

Crestron C2-AUDIO-6PAK Six-Zone Audio Package
Wizard. The minimum required versions are available from the Crestron Audio Six-
Pack CD.
The versions are:
• SIMPL Windows v2.04.14.05 or later. Requires SIMPL+

Cross
Compiler version 1.1.
• VT Pro-e v3.1.2.0 or later.
• Crestron Database v16.0.4 or later.
• Crestron AppBuilder v1.2.4 with Audio Six-Pack Wizard.
The latest software versions can also be obtained from the Downloads | Software
Updates section of the Crestron website (www.crestron.com).
Installation of Crestron Application Builder
Download and double click the Crestron AppBuilder .EXE (version 1.2 or later) file
from the Crestron website. The InstallShield Wizard opens. Follow the steps to
complete the install.
There are certain versions of SIMPL Windows, VT Pro-e, and the Crestron Database
required to successfully operate with the Wizard. The minimum required versions
can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com)
. The versions are:
• SIMPL Windows v2.04.14.05 or later. Requires SIMPL+

Cross
Compiler version 1.1.
• VT Pro-e v3.1.2.0 or later.
• Crestron Database v16.0.4 or later.
• Crestron AppBuilder v1.2.4 with Audio Six-Pack Wizard.
Three Step Configuration
NOTE: The Wizard in the Crestron Audio Six-Pack CD (version 1.2) allows a
system to be configured with either a CP2 or CP2E processor. If a different processor
is part of your system, use the Crestron AppBuilder after completing the steps in the
Wizard to swap control systems. Refer to “Appendix A: Swapping Control Systems”
on page 23 for details.
Use the easy three-step configuration of the Crestron Audio Six-Pack Wizard
described on the following pages to complete the six-zone audio system. Refer to the
on-line and context-sensitive (F1) help, if assistance is needed.
Reference Guide – DOC. 8188B Six-Zone Audio Package: C2-AUDIO-6PAK • 9