Crestron C2N-CBD-TS/C2N-CBF-T ® Cameo Keypads Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON The specific patents that cover Crestron products are listed at patents.crestron.com. Crestron, the Crestron logo, Cameo, Cresnet, Crestron Toolbox, D3 Pro and SystemBuilder are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Contents Cameo Keypads: C2N-CBD-TS/ C2N-CBF-T 1 Introduction ...................................................................................... 1 Features and Functions .......................................................... 1 Specifications ......................................................................... 4 Physical Description .............................................................. 6 Industry Compliance..................................
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Cameo Keypads: C2N-CBD-TS/ C2N-CBF-T Introduction Features and Functions • Stylish and versatile wall mount keypads • Standard electrical box installation1 • Low-profile appearance2 • New color-matched “smooth” and “textured” finishes • New refined pushbutton look and feel • Versatile combinations of pushbuttons • Installer-configurable with choice of three button sizes • Programmable for up to three functions per button • Customizable backlit button engraving •
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Crestron® Cameo® presents a fresh, innovative concept in keypad design featuring an elegant appearance with versatile button configurations. Cameo Standard Mount The C2N-CBD-TS is a "standard mount" model designed for installation in a conventional electrical gang-box using a decorator style faceplate (not included). New “smooth” and “textured” finishes match perfectly with popular off-the-shelf decorator faceplates.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Customizable Buttons Exquisitely simple yet highly customizable, a single Cameo keypad can be configured easily by the installer to provide an array of buttons. Each keypad is actually furnished with an assortment of engravable blank button caps in three different sizes to support a variety of physical layouts.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Specifications Specifications for the Cameo keypads are listed in the following table. Cameo Specifications SPECIFICATION DETAILS Power Requirements Cresnet Power Usage Default Net ID Minimum 2-Series Control System Update File 1, 2 C2N-CBD-TS / C2N-CBF-T Firmware Environmental Temperature Humidity Heat Dissipation Enclosure Flush Mount Model Standard Mount Model Dimensions: Flush Mount Model 0.5 Watt (0.02 Amps @ 24 VDC) 25 Version 3.155.1240.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Cameo Specifications (Continued) SPECIFICATION Available Accessories CB2-BTN[A, B, BRN, DA, GRY, IVR, W]-S DETAILS (1) Large Engravable Button Cap, Smooth (specify color) CB2-BTN[A, B, DSK, LAT, W]-T (1) Large Engravable Button Cap, Textured (specify color) CB3-BTN[A, B, BRN, DA, GRY, IVR, W]-S (1) Medium Engravable Button Cap, Smooth (specify color) CB3-BTN[A, B, DSK, LAT, W]-T (1) Medium Engravable Button Cap, Textured (specify color) CB6-BTN[A, B, BR
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Physical Description This section provides information on the connections, controls and indicators available on your Cameo keypads. Cameo Keypad Physical View – Flush Mount The illustration above shows the flush mount model with two triple-row button caps. Button caps are laser-engravable designed with the Crestron Engraver software.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Flush Mount Configuration – Keypad Overall Dimensions Rear Housing Assembly Operations & Installation Guide - DOC.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Standard Mount Configuration − Keypad Overall Dimensions Rear Housing Assembly 8 • Cameo Keypads Operations & Installation Guide - DOC.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Connectors, Controls & Indicators # CONNECTORS*, CONTROLS & INDICATORS DESCRIPTION 1 4-pin 3.5mm detachable terminal block. Cresnet slave port, connects to Cresnet control network Pin 1 (24) Power Pin 2 (Y) Data Pin 3 (Z) Data Pin 4 (G) Ground 2 3-pin 3.5mm detachable terminal block.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Connectors, Controls & Indicators (Continued) # 4 CONNECTORS*, CONTROLS & INDICATORS DESCRIPTION Buttons Keypad Buttons Configurable for an array of single-action pushbuttons Programmable for normal, tap, double-tap, and hold Includes small, medium, and large button caps Custom backlit engraved button caps available separately Photosensor for control of autodimming function. Can be configured to report ambient light level to control system.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Installation consists of connecting the unit to the Cresnet system, connecting the contact closure input cable, if any, and then inserting the unit into the mounting surface or attaching it to an electrical box, depending on the keypad configuration. The following items are required for all installations: • Cresnet network cable (not supplied) • Cresnet 4-pin mating connector (supplied) • Contact closure input 3-pin mating connector (supplied) • No.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T 3. Hold the bezel and rear housing together and install and tighten the two supplied Phillips pan head, 2-28 x 3/16” cover screws (black) into the rear housing assembly, as shown in the following illustration. 4. Press each button to be certain that you feel the press and release to ensure that the button caps move freely. 5. Use the supplied template to prepare the hole in the mounting surface.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads After the Cresnet network wiring has been installed and verified, use the following procedure to install the keypad in the prepared hole. 1. Turn Cresnet system power OFF. 2. Connect the Cresnet cable, using the supplied mating connector, to the keypad’s NET port. 3. Connect the contact-closure input cable, if any, using the supplied mating connector, to the keypad’s INPUT port. 4. Make sure the keypad is oriented properly and insert the keypad in the hole.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Standard Mounting Installation The standard-mount Cameo keypad is supplied partially assembled along with several items as listed in the following table.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads 3. Hold the bezel and rear housing together. 4. Install and tighten the two supplied Phillips pan head, 2-28 x 3/16” cover screws (black), as shown in the illustration. 5. Press each button to be certain that you feel the press and release to ensure that the button caps move freely. After the Cresnet network wiring has been installed and verified, use the following procedure to install the keypad in a standard, single-gang electrical box (not supplied). 1.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T CAUTION: Excess wire pinched between the keypad and electrical box could short out. Make sure that all excess wire is completely inside the electrical box and not between the box and the keypad. 4. Make sure the keypad is oriented properly, place it in the electrical box, and attach using the supplied 7/8 in. pan head screws. 5. Attach the desired decorator style faceplate (not supplied). 6. Turn the Cresnet system power ON.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Programming is organized into six system Views of the lighting system, each providing a moveable toolbox of devices such as interfaces, fixtures and control modules. You can add a device to your system simply by selecting it from one of the toolboxes and dragging it to a room. The available toolboxes differ depending on the View but all Views include a "General" toolbox that allows you to add areas and rooms at any time.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads C2Net Device, Slot 9 • Additional Cameo Series devices are assigned different Net ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the Net ID, as shown in the following figure. “C2N-CB-TS Device Settings” Window • The ID code(s) specified in the SIMPL Windows program must match the Net ID of each unit. Operations & Installation Guide - DOC.
Cameo Keypads Program Manager Crestron C2N-CBD-TS/C2N-CBF-T Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double-clicking on the icon or dragging it into Detail View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (and/or device).
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Programs and Firmware Program or firmware files may be distributed from programmers to installers or from Crestron to dealers. Firmware upgrades are available from the Crestron website as new features are developed after product releases. One has the option to upload programs via the programming software or to upload and upgrade via the Crestron Toolbox.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Ambient Light Sensor Operation As noted previously, the Cameo keypad has an ambient light sensor that can be used to automatically turn the backlight on in a dark room, or off in a lit room to improve the readability of the button text. When this feature is enabled, three parameters are available to adjust this behavior: Threshold, Max Auto Backlight, and Min Auto Backlight.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Auto Backlight Preset Parameter Settings COLOR/ TEXTURE Almond, Smooth/Textured Black, Smooth/Textured Brown, Smooth Dark Almond, Smooth Dusk, Textured Gray, Smooth Ivory, Smooth Latte, Textured White, Smooth/Textured 26 • Cameo Keypads RECOMMENDED SETTING FOR “AUTO BACKLIGHT PRESET” PARAMETER 2 3 3 2 2 1 2 2 1 Operations & Installation Guide - DOC.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. Cameo Troubleshooting TROUBLE POSSIBLE CAUSE(S) The keypad does not function. The wrong power supply is being used. The unit is not receiving power, or is receiving insufficient power. The keypad does not function. All six feedback LEDs are on low.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Check Network Wiring Use the Right Wire In order to ensure optimum performance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used. Failure to do so may incur additional charges if support is required to identify performance deficiencies because of using improper wire. Calculate Power CAUTION: Use only Crestron power supplies for Crestron equipment.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads NOTE: All Crestron certified Cresnet wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pair is the Y conductor and the Z conductor. Strip and Tin Wire When daisy-chaining Cresnet units, strip the ends of the wires carefully to avoid nicking the conductors. Twist together the ends of the wires that share a pin on the network connector and tin the twisted connection.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T First-time users will need to establish a user account to fully benefit from all available features. Future Updates As Crestron improves functions, adds new features and extends the capabilities of the Cameo keypads, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads Appendix: Template for Flush Mount Hole The following figure (not to scale) illustrates the supplied template used to prepare the hole in the wall or other mounting surface for the flush mount Cameo keypad. NOTE: Use only the original template, not a photocopy, to prepare the hole. Photocopies usually alter the size of the image slightly, which would make the hole the wrong size.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads This page intentionally left blank. Operations & Installation Guide - DOC.
Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T This page intentionally left blank. 34 • Cameo Keypads Operations & Installation Guide - DOC.
Crestron C2N-CBD-TS/C2N-CBF-T Cameo Keypads This page intentionally left blank. Operations & Installation Guide - DOC.
Crestron Electronics, Inc. Operations & Installation Guide - DOC. 6603D 15 Volvo Drive Rockleigh, NJ 07647 (2018490) Tel: 888.CRESTRON 03.14 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
