User Guide

Crestron C2N-DB6/8/12 Decorator Wall Panels
Operations & Installation Guide - DOC. 6154 Decorator Wall Panels: C2N-DB6/8/12 • 3
Specifications
The following table provides specifications for the wall panels.
Specifications for the Wall Panels
SPECIFICATION DETAILS
Power Re
q
uirements
3 Watts
(
0.125 Amp
@
24 VDC
)
Default Network ID
73, 72, or 71
(
for C2N-DB6/8/12
)
LED T
yp
e
Red, dimmable via pro
g
ram
Control System Update Files
1, 2, 3
2-Series Control System Update Version C2-2.004.CUZ or later
CEN/CN-TVAV Update File Version 5.10.13V.UPZ or later
CNMSX-AV/Pro Update File Version 5.10.11X.UPZ or later
CNRACKX/-DP Update File Version 5.10.11W.UPZ or later
ST-CP Update File Version 4.02.04S.UPZ or later
Environmental Temperature 32°F - 113°F (0°C - 45°C)
Humidity 10% to 90% RH (non-condensing)
Dimensions and Weight Height: 4.16 in (10.57 cm)
Width: 1.79 in (4.55 cm)
Depth: 1.53 in (3.89 cm)
4
Weight: 2.60 oz (75 g)
1. The latest software versions can be obtained from the Downloads | Software
Updates section of the Crestron website (www.crestron.com). Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E,
PAC2, PRO2 and RACK2.
3. Filenames for CNX and ST-CP update files have a UPZ extension. Files on the
website may be .zip or self-extracting .exe files containing the .cuz or .upz file. To
avoid program problems, make sure you are using the update file with the correct
suffix letter (e.g., S, V, W, X).
4. The depth of the wall panel is listed without the Cresnet connector (which would
add approximately 0.45 in. plus
clearance for the wiring).
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).