User Guide
Crestron C2N-DEMO Lighting Case Demonstration Case
“Internet Protocol (TCP/IP) Properties” Window
Click on OK to exit and save settings.
NOTE: The PAC2 utilizes a dual port Ethernet card with firewall enabled. Use this
as a point for discussions regarding system security. Refer to step 4 for accessing a
web page through a firewall.
3. Ethernet Cable
Connect the supplied Ethernet cross-over cable between the Lighting
Case Ethernet port (marked LAN A) and the Ethernet port on your
laptop. Use the Ethernet cross-over cable supplied with the Crestron
C2N-DEMO Interface Case to connect the Ethernet port on the
Interface Case with the Lighting Case Ethernet port (marked LAN B).
NOTE: Unless you have a hub, a standard Ethernet cable does not work when
connecting the Lighting Case to your laptop.
4. Web Page
Open Internet Explorer on your laptop and type in the following
address: http://192.168.1.2:8080
. The “:8080” portion allows for a
specially defined path through the firewall. Use this opportunity to
discuss other security features such as SSL (Secure Socket Layer).
Reference Guide – DOC. 6282 Crestron Demonstration Case: C2N-DEMO Lighting Case • 3