Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit Contents Intercom Interface Mounting Kit: C2N-IIF-SPMK 1 Introduction......................................................................................1 Features and Functions ..........................................................1 Physical Description ..............................................................1 Assembly..........................................................................................4 Further Inquiries............
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit Intercom Interface Mounting Kit: C2N-IIF-SPMK Introduction Features and Functions The Crestron® Intercom Interface Mounting Kit (C2N-IIF-SPMK) is used to install a C2N-IIF Intercom Interface into select door station products from Holovision®. The kit includes a speaker, microphone, and mounting hardware for attaching the C2N-IIF to door station plates from Holovision (sold separately).
Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK Dimensions for the C2N-IIF-SPMK are shown in the following diagram. C2N-IIF-SPMK Physical Views 2 • Intercom Interface Mounting Kit: C2N-IIF-SPMK Installation Guide - DOC.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit The C2N-IIF-SPMK includes all of the parts required for mounting a C2N-IIF to a Holovision door station plate. The following table lists all of the parts included with the C2N-IIF-SPMK.
Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK Assembly Tools Required • #2 Phillips tip screwdriver • Tin Snips (for installation with a rough-in box) Complete the following procedure in the order provided. NOTE: When installing the C2N-IIF-SPMK with Holovision’s keypadequipped plates, refer to Diagram A. For all other compatible Holovision plates, refer to Diagram B. NOTE: Observe the orientation of all components in the assembly diagrams to ensure proper fit. 1.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit 2. As shown in the following diagram, position the speaker over the mounting holes in the door station plate. Positioning the Speaker 3. Position the supplied 1 7/16” spacers over the speaker mounting holes as shown in the following diagram. Using the supplied 1 3/4” screws, secure the door station plate, speaker, and spacers to the appropriate holes on the mounting plate. NOTE: Use a toothpick or small dowel to line up the parts during assembly.
Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK NOTE: The nuts that are built in to the mounting plate should face the door station plate. NOTE: Diagram A and Diagram B use different holes on the mounting plate to mount to the door station plate. 4. Using the supplied 1/4” screws, secure the C2N-IIF to the mounting plate as shown in the following diagram. Attaching the C2N-IIF to the Mounting Plate NOTE: The C2N-IIF must be placed on the mounting plate with the orientation shown in the diagrams.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit 5. Connect all wires to the C2N-IIF as described in the C2N-IIF Operation & Installation Guide (Doc. 6235) which can be downloaded from Downloads | Product Manuals section of the Crestron website (www.crestron.com). NOTE: The red wire from the microphone is connected to the “MIC” terminal on the C2N-IIF. The black wire and shield wire are connected to the “GND” terminal located next to the “MIC” terminal. 6.
Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK This page intentionally left blank. 10 • Intercom Interface Mounting Kit: C2N-IIF-SPMK Installation Guide - DOC.
Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit This page intentionally left blank. Installation Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide - DOC. 6265 05.04 Specifications subject to change without notice.