User Guide

Intercom Interface Mounting Kit Crestron C2N-IIF-SPMK
NOTE: The nuts that are built in to the mounting plate should face the
door station plate.
NOTE: Diagram A and Diagram B use different holes on the mounting
plate to mount to the door station plate.
4. Using the supplied 1/4” screws, secure the C2N-IIF to the
mounting plate as shown in the following diagram.
Attaching the C2N-IIF to the Mounting Plate
NOTE: The C2N-IIF must be placed on the mounting plate with the
orientation shown in the diagrams.
6 • Intercom Interface Mounting Kit: C2N-IIF-SPMK Installation Guide - DOC. 6265