User Guide

Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit
5. Connect all wires to the C2N-IIF as described in the C2N-IIF
Operation & Installation Guide (Doc. 6235) which can be
downloaded from Downloads | Product Manuals section of the
Crestron website (www.crestron.com
).
NOTE: The red wire from the microphone is connected to the “MIC”
terminal on the C2N-IIF. The black wire and shield wire are connected to
the “GND” terminal located next to the “MIC” terminal.
6. Install the assembly per the instructions provided with the
Holovision door plate.
To install into a Holovision rough-in box, tilt the assembly so
the bottom can be placed in the box first and then shift the top
of the assembly to the right, so the rest of the assembly can be
placed in the box.
Installation Guide - DOC. 6265 Intercom Interface Mounting Kit: C2N-IIF-SPMK • 7