User Guide

Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit
The C2N-IIF-SPMK includes all of the parts required for mounting a
C2N-IIF to a Holovision door station plate. The following table lists all
of the parts included with the C2N-IIF-SPMK.
Supplied Components
DESCRIPTION
PART
NUMBER
QUANTITY
Mounting Plate 2010173 1
Screw, 08-32, 1/4” L, pan phillips 2007264 2
Screw, 06-32, 1 3/4” L, flat phillips 2010428 4
Spacer, 06, 1 7/16” L, round, 1/4” OD 2010427 4
Speaker Assembly 4005371 1
Microphone Assembly 4005461 1
Screw, 04-40, 3/4” L, pan phillips 2007184 2
Spacer, 04, 3/8” L, round, 1/4” OD 2007088 2
Washer, flat 2007658 2
The C2N-IIF-SPMK is compatible with the following Holovision door
station models:
• Basic Model 100
• Camera Models 200 and 201
• Keyless Model 101
• Gate Entry Models: 300, 301, 302, and 303
NOTE: When ordering a Holovision plate, specify that the plate is to be
used with a Crestron C2N-IIF. Older Holovision plates may not have the
appropriate mounting provisions for the C2N-IIF-SPMK.
NOTE: If the C2N-IIF-SPMK is being used with a camera-capable door
station plate, the camera is not included with the C2N-II-SPMK.
NOTE: The C2N-IIF-SPMK cannot be used with Holovision plates that
use a camera hidden behind the speaker grate.
Installation Guide - DOC. 6265 Intercom Interface Mounting Kit: C2N-IIF-SPMK • 3