User Guide

Crestron C2N-IIF-SPMK Intercom Interface Mounting Kit
2. As shown in the following diagram, position the speaker over
the mounting holes in the door station plate.
Positioning the Speaker
3. Position the supplied 1 7/16” spacers over the speaker mounting
holes as shown in the following diagram. Using the supplied
1 3/4” screws, secure the door station plate, speaker, and
spacers to the appropriate holes on the mounting plate.
NOTE: Use a toothpick or small dowel to line up the parts during
assembly.
Securing the Mounting Plate
Installation Guide - DOC. 6265 Intercom Interface Mounting Kit: C2N-IIF-SPMK • 5