User Guide

Intercom Interface Crestron C2N-IIF
Specifications of the C2N-IIF (continued)
SPECIFICATION
DETAILS
Outputs (continued)
General Purpose Outputs
DC Supply Voltage
(2) Located at “OUTPUT” connector.
Used to supply power to devices
connected to switched outputs.
Output Voltage
Output Current
Short Circuit Protection
24 VDC
0.5 A total
Re-settable fuse, 0.75 A nominal
WAV Audio
Storage Capability
Total WAV File Length
WAV File Sample Rate
Volume Control
Tone Control
(1) Located at “AV IO” connector
(“SPK+” and “SPK-“ terminals)
30 WAV files
30 seconds (at 8 KHz)
8 KHz (8 bit, mono)
Electronic
+ / - 14 dB, in 2 dB steps, Electronic
Voice Audio (1) Located at “AV IO” connector
(“SPK+” and “SPK-“ terminals)
Volume Control
Tone Control
On / Off Control
-80 to +20 dB, in 1 dB steps,
Electronic
+ / - 14 dB, in 2 dB steps, Electronic
Electronic
Video Camera Power (1) Located at “AV IO” connector
(”12V“ terminal)
Output Voltage
Max Output Current
Short Circuit Protection
Minimum Wire Size
+12 VDC
200 mA
Re-settable fuse, 0.3 A nominal
20 AWG
(continued on next page)
6 • Intercom Interface: C2N-IIF Operations & Installation Guide - DOC. 6235