User Guide

Crestron C2N-IIF Intercom Interface
NOTE: Images shown are for illustrative purposes only.
VIDEO (OUT)
This RJ-45 connector supplies a balanced composite video signal from
the door station camera (if equipped) to a Crestron C2N-IVDS24x24 or
any other device that receives balanced composite video over CAT5
cable.
RJ-45 Connector Specifications
TYPE PIN SIGNALS
1 Video +
2 Video -
3 N/A
4 N/A
5 N/A
6 N/A
7 N/A
8-Position
RJ-45
8 N/A
1
8
1
8
Front
Top
NOTE: For additional information on audio/video connections over
CAT5, refer to the latest version of the Crestron CAT5 Wiring Reference
Guide (Doc. 6137) which is available from the Downloads | Product
Manuals section of the Crestron website (www.crestron.com
).
AUDIO (IN/OUT)
This RJ-45 connector receives balanced, mono, audio signals from a
Crestron C2N-IADS30x24 or any other device that sends balanced mono
audio signals over CAT5 for transmission through the C2N-IIF’s speaker
output. This connector also supplies balanced, mono, audio signals from
a door station’s microphone output to a Crestron C2N-IADS30x24 or any
other device that receives balanced, mono, audio signals over CAT5.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 11