User Guide

Intercom Interface Crestron C2N-IIF
4. Click on the Search for Touch Settable Devices button. The
system searches the network and lists all TSID-enabled
devices found. The list is similar to the report produced by
pressing F4 (Report Network Devices); the first eight digits of
each line constitute the TSID number (hexadecimal form of
the serial number).
“Set Net ID by TSID” Window
5. Enter either the serial number or TSID number of the device
that requires a change. The list scrolls to and highlights the
device listing. The listing should show the device’s current
Cresnet ID (a.k.a. Net ID).
6. Enter the Cresnet ID that the device should be set to and click
OK. The number you enter should appear on the list.
CAUTION: This function does not prevent you from setting duplicate
IDs. Be sure to check current assignments before entering the desired
Cresnet ID number.
Serial Number to TSID Conversion
This utility is useful in a case where there are multiple devices of the
same type on a network, you need to locate a particular one, you know
22 • Intercom Interface: C2N-IIF Operations & Installation Guide - DOC. 6235