User Guide

Crestron C2N-IIF Intercom Interface
the TSID but not the serial number, and your site installation list is based
on device serial numbers. In this (or the reverse) situation, do the
following:
1. Open the Crestron Viewport.
2. From the Viewport menu, select Functions | Serial Number
ÅÆ TSID Conversion Tool. The “Serial Number ÅÆTSID
Conversion Tool” window is displayed.
“Serial Number to TSID Conversion Tool” Window
3. Enter the serial number or TSID number as instructed; press
the appropriate button to obtain the corresponding number.
NOTE: Enter serial numbers, including spaces, exactly as they appear
on the unit label. Alpha characters in serial numbers or TSID numbers
may be entered in upper or lower case.
Installation
The C2N-IIF can be installed in a door station enclosure or near a door
station (typically within 10 feet) using the included dual-lock fastener
strip or #6 pan head screws (not supplied). The optional C2N-IIF-SPMK
Intercom Interface Mounting Kit can be used for installation with specific
Holovision door station plates. For more information on the
C2N-IIF-SPMK refer to the latest revision of the C2N-IIF-SPMK
Installation Guide (Doc. 6265) which can be downloaded from the
Downloads | Product Manuals section of the Crestron website
(www.crestron.com
).
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 23