User Guide

Crestron C2N-IIF Intercom Interface
Setting the Net ID in Device Settings
Double-click the C2N-IIF icon to open the “Device Settings” window.
This window displays the C2N-IIF device information. If necessary,
select the Net ID tab to change the Net ID, as shown in the following
figure.
“Device Settings” Window for the C2N-IIF
NOTE: SIMPL Windows automatically changes Net ID values of a
device added to a program if a duplicate device or a device with the same
default Net ID already exists in the program. Always ensure that the
hardware and software settings of the Net ID match. For Net ID hardware
settings details, refer to “Identity Code” on page 20.
C2N-IIF Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron
control system by assigning signals to symbols. The following describes
the C2N-IIF symbol in the SIMPL Windows Programming Manager.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 27