User Guide

Crestron C2N-IIF Intercom Interface
Sound Manager Guidelines
There are two things to keep in mind when using Sound Manager.
1. Each WAV file must be assigned a unique digital join
number. The join number options include none, or a number
(13 for WAV file 1 through 42 for WAV file 30). The default
is none. The other WAV files can be played by having the
SIMPL Windows program assert the assigned join number.
2. Each WAV file must have the correct audio format and
attributes for the C2N-IIF target type selected in VT Pro-e.
The correct audio format is PCM, 8 KHz, mono, 8 bit.
Using Sound Manager
The Sound List component, shown below, permits the designer to attach
WAV files to the C2N-IIF project. Complete the following steps to attach
(add) a WAV file.
Sound List Component
1. Use the Browse button to locate the desired WAV files. It
should appear in the field adjacent to the Browse button.
2. If necessary, select the Play button to verify that the file in the
browse field is the desired file.
3. Select the Add button to transfer the WAV file to the Sound
List table located below the browse field. The audio
parameters of the file also appear to the right of the table.
4. Repeat steps 1 through 3 for each desired WAV file.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 35