User Guide

Crestron C2N-IIF Intercom Interface
3. Select RS-232 as the connection type. Verify that an available
COM port (COM 1 is shown after this step) is selected, and
that all communication parameters and necessary options
from the “Port Settings” window are selected as shown after
this step. Click the OK button to save the settings and close
the window.
“Port Settings” Window
NOTE: The parameters shown in the illustration above are the port
settings for a 2-Series control system. Consult the Operations Guide for
the control system being used for exact parameter selection.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 39