User Guide

Crestron C2N-IIF Intercom Interface
any SIMPL+ modules, only the SIMPL Program check box
will be enabled. If it does contain SIMPL+ modules, then the
SIMPL+ Program(s) check box will also be enabled. Select
one or both check boxes and then click Send Program to
begin the transfer.
NOTE: Refer to the respective Operations Guide for the control system
for details about the other fields shown on the “Send Program” window.
“Send Program” Window
4. To verify that the program has been transferred successfully,
select Diagnostics | Report Program Information. This
should display a window that provides details about the
current program loaded into the control system.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 41