User Guide

Intercom Interface Crestron C2N-IIF
Firmware Upgrade
A firmware
upgrade file
has the
extension
.csf.
To take advantage of all of the C2N-IIF features, it is important that the
unit contains the latest firmware available. Please check the Crestron
website (http://www.crestron.com/downloads/software_updates.asp
) for
the latest version of firmware. Not every product has a firmware upgrade,
but as Crestron improves functions, adds new features, and extends the
capabilities of its products, firmware upgrades are posted. To upgrade the
firmware, complete the following steps.
NOTE: The following is the acceptable file extension for a firmware
update file:
.upg C2N-IIF.V.XXXXX.upg (C2N-IIF firmware)
NOTE: You must use Viewport version 3.81 or later to update the
C2N-IIF firmware.
1. Make sure that “Communication Settings,” which begins on
page 37, has been performed.
2. As shown after this step, select File Transfer | Update
Network Device Firmware… from the Viewport menu bar.
File Transfer | Update Network Device Firmware… Command
44 • Intercom Interface: C2N-IIF Operations & Installation Guide - DOC. 6235