User Guide
Crestron C2N-IIF Intercom Interface
3. As shown in the “Select Network ID” window, select the Net
ID of the C2N-IIF, and then click OK. The “Open” window
appears (refer to the following graphics).
“Select Network ID” Window
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the
Cresnet bus speed.
“Open” Window
4. Browse to the desired [filename].upg file and click Open to
begin the transfer.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 45