User Guide

Crestron C2N-IIF Intercom Interface
C2N-IIF Troubleshooting (continued)
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE ACTION
C2N-IIF is set to the
wrong operating
mode.
Set correct operating mode
(see “C2N-IIF Symbol in
Programming Manager" on
page 27).
C2N-IIF
switched
outputs do
not function.
C2N-IIF OUTPUT
connector is wired
incorrectly for
operating mode.
Rewire OUTPUT connector
for desired operating mode
(see “OUTPUT" on page 14).
Further Inquiries
If after reviewing this Operations & Installation Guide, you cannot locate
specific information or have questions, please take advantage of
Crestron's award winning customer service team by calling:
• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876].
• In Europe, call Crestron International at [phone].
• In Asia, call Crestron Asia at [phone].
• In Latin America, call Crestron Latin America at
[phone].
• In Australia and New Zealand, call Crestron Pacific at
[phone].
You can also log onto the online help section of the Crestron website
(www.crestron.com
) to ask questions about Crestron products. First-time
users will need to establish a user account to fully benefit from all
available features.
Operations & Installation Guide - DOC. 6235 Intercom Interface: C2N-IIF • 47