User Guide

Crestron C2N-MMS-SC Scan Converter Card for C2N-MMS
Setting the Net ID in Device Settings
Double-click the C2N-MMS w/C2N-MMS-SC icon to open the “Device
Settings” window. This window displays the C2N-MMS device
information. If necessary, select the Net ID tab to change the Net ID, as
shown in the following figure.
“Device Settings” Window for the C2N-MMS w/C2N-MMS-SC
NOTE: SIMPL Windows automatically changes NET ID values of a
device added to a program if a duplicate device or a device with the same
default NET ID already exists in the program. Always ensure that the
hardware and software settings of the NET ID match. For NET ID
hardware settings details, refer to the latest revision C2N-MMS
Operations Guide (Doc. 6132).
C2N-MMS Symbol in Programming Manager
Programming Manager is where programmers “program” a Creston
control system by assigning signals to symbols.
Analog Initialize
The inputs to the C2N-MMS w/C2N-MMS-SC symbol require the
analog equivalent (0 through 4 for video and 0 through 4 for RGB where
“0” is off) so that the video or RGB output can be switched to the
specified input or turned off. Refer to the latest revision of the
C2N-MMS Operations Guide (Doc. 6132) for creating the Analog
Initialize modules for the RGB Output channels.
Operations & Installation Guide - DOC. 6138 Scan Converter Card for C2N-MMS: C2N-MMS-SC • 11