User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
Indicators
The C2N-MNETGW indicators are described in the following
paragraphs.
PWR (Power)
This LED illuminates when 24 VDC is supplied to the C2N-MNETGW
via the NET port.
NET
This LED illuminates when communication between the control system
and the C2N-MNETGW (over Cresnet) is established (the unit is polled
on the network). Illumination indicates that the SIMPL Windows
program currently loaded has a network device defined at the same Net
ID as the C2N-MNETGW.
RXD
This LED illuminates when the C2N-MNETGW is receiving data from
wireless devices on the infiNET network.
TXD
This LED illuminates when the C2N-MNETGW is transmitting data to
wireless devices on the infiNET network.
ACQUIRE LED & Pushbutton
The ACQUIRE pushbutton and its associated LED are used to configure
the wireless network. Refer to “Configuring the infiNET Network” on
page 12.
SETUP LED and Pushbutton
The C2N-MNETGW is TSID ready. The SETUP pushbutton and its
associated LED are used for setting up the unit’s network ID during the
initial configuration of a Cresnet system or when the device is being
added/replaced. Refer to “Identity Code” on page 10 for detailed
information.
6 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317