User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
5. Type a new Net ID and press Enter.
Enter New Net ID
Repeat this procedure for each additional network device requiring a Net
ID change.
Configuring the infiNET Network
Rules for an infiNET Network
Each device on the infiNET network must be configured to work with an
infiNET gateway.
Following are some guidelines to observe when setting up an infiNET
network.
• Each infiNET device can be linked with only one gateway.
• Each gateway can be linked with multiple infiNET devices.
• When adding a device, both the device and the gateway must be
in the Acquire mode. Refer to “Acquiring Devices” on page 15
for information.
Setting the Operating Channel
The C2N-MNETGW can operate on a fixed channel that is set by the
installer or it can automatically set itself to the clearest channel.
12 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317