User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
4. Right click the Net ID of the gateway whose channel will be
changed and select Functions | MNET Gateway… to open the
“MNET Gateway” window as shown in the following diagram.
“MNET Gateway” Window
5. At the top of the window, select the channel selection mode. There
are two modes to select from.
• Auto: The C2N-MNETGW automatically selects the
clearest of the available 16 channels when interference is
detected. The gateway will scan for a new channel if it
detects a specific level of interference.
• Fixed: The C2N-MNETGW is set to the channel
specified from the adjacent dropdown list.
NOTE: Changes to the channel and channel selection mode are applied
immediately.
6. Click Close to close the “MNET Gateway” window and return to
the Network Device Tree.
14 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317