User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
“MNET Gateway” Window-Acquired Devices
NOTE: If the acquired devices have never had an MNET ID
assigned, they will be acquired with the default MNET ID 01.
Just like a device on a Cresnet system (like the C2N-MNETGW)
requires a unique identity code (NET ID), every device and user
interface on the infiNET network requires a unique identity code
(MNET ID) that identifies it to a control system. These codes are
two-digit hexadecimal numbers from 03 to 20. The MNET ID of
each unit must match an ID code specified in the SIMPL Windows
program.
Click Close to close the “MNET Gateway” window.
The Acquire mode can also be stopped by pressing the ACQUIRE
button on the C2N-MNETGW.
To enter the Acquire mode from the C2N-MNETGW, do the following:
1. Press ACQUIRE on the C2N-MNETGW to enter the Acquire
mode. The accompanying LED will illuminate indicating that it is
ready to link to infiNET devices.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 17