User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
NOTE: The C2N-MNETGW must be placed in the Acquire mode
before an infiNET device is placed in the Acquire mode.
2. Place new infiNET devices in the Acquire mode as described in
their respective manuals. Devices will be automatically acquired
by the gateway approximately five minutes after they enter the
Acquire mode.
3. Press ACQUIRE on the C2N-MNETGW to exit the Acquire
mode. The LED will turn off.
NOTE: When started from the C2N-MNETGW, the Acquire
mode will automatically deactivate after 30 minutes.
NOTE: Devices that are acquired when the Acquire mode is
started from the C2N-MNETGW are not displayed in the “MNET
Gateway” window until Refresh is clicked.
Network Device Tree View of infiNET Devices
To view infiNET devices in the Network Device Tree that have already
been acquired and are currently communicating with the
C2N-MNETGW, click the Network Device Tree
icon, or select Tools
| Network Device Tree. Every infiNET device that is acquired by the
gateway will be displayed with an MNET ID.
Network Device Tree with infiNET Devices
18 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317